Page 1 of 1
Key1 key2
Posted: Sun Apr 18, 2021 4:52 pm
by Soota
Hello.
I have a radio with sku: AE0373B-05A and I am not clear where to connect the cables key1 and key2 to be able to configure the steering wheel control in my car which is a vw scirocco of 2012.
Re: Key1 key2
Posted: Thu Apr 22, 2021 10:31 am
by Jammy
Hello
Thanks for your message
The vw car stereo is plug and play, it does not need to connect key1 and key2
You just need to connect the canbus decoder
Best Regards
Jammy
Re: Clave1 clave2
Posted: Fri Apr 23, 2021 6:35 am
by Soota
But from what I've read without those cables you can't reconfigure the steering wheel buttons which is what I want to do.
Re: Key1 key2
Posted: Fri Apr 23, 2021 11:16 am
by Jammy
Hello
Thanks for your message
The car stereo equipped with canbus decoder, which can launch signal to car to resolve steering wheel control.
So did you connect the canbus decoder? does the car stereo work normally?
Best Regards
Jammy
Re: Key1 key2
Posted: Sun Apr 25, 2021 6:18 pm
by Soota
My car has a canbus decoder installed but from what I have seen in the manual of the radio from this option I could reconfigure the steering wheel buttons, but I do not know where the key1 and key2 wires go.
Thanks
Re: Key1 key2
Posted: Tue Apr 27, 2021 10:27 am
by Jammy
Hello
Thanks for your message
Could you please check if ithe car stereo works without connect key1 and key2?
Best Regards
Jammy
Re: Key1 key2
Posted: Tue Apr 27, 2021 1:11 pm
by Soota
Hi, thanks for your reply Steering wheel buttons do not work
Best regards
Re: Key1 key2
Posted: Fri Apr 30, 2021 9:31 am
by Jammy
Hello
Thanks for your message
When did you buy this car stereo and when did this question happen?
Could you please take some pictures to show how you connect the cables?
And would you mind taking a short video to show the issue of steering wheel control?
Hope can hear from you
Best Regards,
Jammy