27-AQTU73-03 into 2006 Toyota Sienna install help needed.

[rjt]

[Jammy]

Hi,
For the power cable adapter problem, i have give you a link on the latest post.Please check.
For the steering wheel control problem,you just need to respectively connect the steering SW1,steering SW2 and SW Ground wire of your wire harness to w+1,w+2 and black wire of the ISo cable.
Here are some picture referenced.

U4A}KBD@S8Y4D2~Q6ODCCFM.jpg (70.59 KiB) Viewed 2217 times

A610FC874D3C8F8113B051D3EEFFAE64.jpg (38.71 KiB) Viewed 2217 times

09A8FD83EFFC7350D415328BA9AAAEB3.jpg (41.11 KiB) Viewed 2217 times

If you still have any problem,contact us feel free.
Regard.

[rjt]

[rjt]

What name is given to the the connectors pictured in Jammys answer? Want to try finding some locally or online. My fellow Americans, would most most US auto parts stores have these connectors?

[rjt]

i have to ask again, what is the specific name part number of the ISO adapter that ships with the unit? I am surprised it does not ship with a mate and then splice the wires into the mate. That way, we could unplug the ISO adapter and immediately disconnect all the connections. i have gone to 3 auto stores and a RadioShack closeout, but no one had anything similar.

[Jammy]

Hi,
sorry for the late reply.
For the connection of steering wheel control problem,the picture is just allowed to refer,it is not your real connector.In your car,there is a connector containing the steering SW1,steering SW2 and SW Ground wire,you just need to manually connect them to the w+1 wire,w+2 wire and black wire of the ISO cable of our unit.If you want to connect them easily,you can buy an adapter.Here is the link.http://www.ebay.com/itm/Toyota-Steering ... SwBLlVgD5w
And this connector ,we can call them as steering wheel control connector.
Sorry again,i don't understand your question well.If you still have problem, could you mind provide a video to show us your question？
Regard.

[rjt]

Thank You.