[Solved] Problem on Steering Wheel Control

Moderators: Jammy, admin

[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable
Ob3ron
Posts: 4
Joined: Mon Sep 17, 2018 7:28 pm
Location: Italy
Contact:

[Solved] Problem on Steering Wheel Control

Postby Ob3ron » Thu Oct 25, 2018 10:26 pm

Hi All, this is my first post, and I hope I'm doing in the right way :) .
I bought the PUMPKIN Android 8.0 Universal Car Radio/Stereo Double Din 6.2 Inch (SKU: ND0279B), very good car stereo. I linked the odb2 and the DAB+, and everything works well, but I have a lot of problems with the steering well control:
I have a fiat 500 Abarth 2010, for sure I bought a can bus interface adapter.
This is what happen: While I'm in the SWC programming and push the SW Buttons the stereo car accept the signal and register but often while I push another button, seems the radio confuse the signal with the button just registered, then, also a button just registered doesn't work any more. So I'm day by day, to register the buttons, and changing the registrations, and then they don't work another time, I'm desperate.
Please help me, many thanks.
Last edited by Ob3ron on Sun Nov 25, 2018 1:29 am, edited 1 time in total.



Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: Problem on Steering Wheel Control

Postby Jammy » Fri Oct 26, 2018 2:19 am

Hi,
you can try to exchange the wire KEY1 (K1) and KEY2(K2) from the ISO cable .
And if this still doesn't help, could you mind show me an video about issue and show me your connections ?
Regards

Ob3ron
Posts: 4
Joined: Mon Sep 17, 2018 7:28 pm
Location: Italy
Contact:

Re: Problem on Steering Wheel Control

Postby Ob3ron » Sun Oct 28, 2018 8:49 am

Thanks for your reply, I tried to swap k1 with k2, but I did not get any results. I've uploaded on wetransfer the video of the connectors and the behaviour of the buttons during the recording, here the link.

Consider that every time I do one I get different results. In this even 3 buttons are not detected.

Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: Problem on Steering Wheel Control

Postby Jammy » Mon Oct 29, 2018 9:18 am

Hi,
i suggest you
1. consult the sell of your swc adapter that whether the adapter support your vehicle first .
2.just only connect the K1 or K2 alone from our unit .
3. remap the steering wheel button just while you start the engine.
Wait for your response.

Ob3ron
Posts: 4
Joined: Mon Sep 17, 2018 7:28 pm
Location: Italy
Contact:

Re: Problem on Steering Wheel Control

Postby Ob3ron » Tue Oct 30, 2018 7:47 pm

Hi, thanks for the suggestions.
I heard the adapter seller and sent to him pictures and videos. Actually He said that could be the adapter defected, He is going to send me a new one.
When the new one will arrive, I'll give you new feedback.
Thankyou anyway in advance.

Ob3ron
Posts: 4
Joined: Mon Sep 17, 2018 7:28 pm
Location: Italy
Contact:

Re: Problem on Steering Wheel Control

Postby Ob3ron » Sun Nov 25, 2018 1:28 am

well, finally I've an answer: it was the swc adapter defected!

Easton40
Posts: 2
Joined: Mon Dec 03, 2018 6:42 pm
Contact:

nd0279b

Postby Easton40 » Mon Dec 03, 2018 6:50 pm

purchased this wanting to run both torque app and phone at same time.
I see nothing about dual band bluetooth..does this model allow me to run both at same time

Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: [Solved] Problem on Steering Wheel Control

Postby Jammy » Tue Dec 04, 2018 8:29 am

Hi,yes.
Regards


[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable

Return to “Android System”

Who is online

Users browsing this forum: No registered users and 3 guests