Image

PX3 date and time problem

All new members are obligated to check this out before any forward action!

Moderators: Jammy, admin

jouke
Posts: 5
Joined: Wed Jun 27, 2018 7:59 am
Contact:

PX3 date and time problem

Postby jouke » Wed Jun 27, 2018 8:05 am

Hi,

I have a strange problem with my new PX3. In the settings I ticked the "update time from GPS" option and it immediately sets the correct time. However, when I turn off the car and come back a couple of hours later the time is off and it won't sync again.
Do you have any idea how to fix this ? It is very annoying.

Thanks,

Jouke
Attachments
IMG_20180627_092831.jpg
IMG_20180627_092831.jpg (1.36 MiB) Viewed 1679 times
IMG_20180627_092821.jpg
IMG_20180627_092821.jpg (1.52 MiB) Viewed 1679 times
IMG_20180627_092808.jpg
IMG_20180627_092808.jpg (1.52 MiB) Viewed 1679 times



Jammy
Posts: 6905
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: PX3 date and time problem

Postby Jammy » Thu Jun 28, 2018 2:30 am

Hi,
sorry for bringing you such bad experience.
There are two solution for this issue.
1.if you want to check the time ,you can enter the GPS info app to find the correct time.
2.contact the pumpkin customer service to change one unit.
Regards

jouke
Posts: 5
Joined: Wed Jun 27, 2018 7:59 am
Contact:

Re: PX3 date and time problem

Postby jouke » Sat Jun 30, 2018 10:11 am

Hi Jammy,

Thank you for your answer. There is nothing else to do but return the unit to have it changed ?
It seems to be a software bug since the syncing works every time I reboot the unit but it just won't sync after a wakeup.

When I check the time in the GPS app it is correct but the system time will not sync with the gps time.

Best regards,

Jouke

Jammy
Posts: 6905
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: PX3 date and time problem

Postby Jammy » Mon Jul 02, 2018 6:34 am

Hi,
sorry that i don't know the detailed cause.
In fact,our engineers tell me if you have a way to get a 1K resistance and unable to solder it to the mother board ,you can do as follows.
1.take apart the unit and take out the mother board.
2.on the back of the mother board ,you can find the resistance R12 as follows.
3.change it to a 1K resistance.
board.png
board.png (998.49 KiB) Viewed 1607 times

4.install the unit back.
Regards

jouke
Posts: 5
Joined: Wed Jun 27, 2018 7:59 am
Contact:

Re: PX3 date and time problem

Postby jouke » Mon Jul 02, 2018 10:08 am

Cool, I give it a try.

Jouke

jouke
Posts: 5
Joined: Wed Jun 27, 2018 7:59 am
Contact:

Re: PX3 date and time problem

Postby jouke » Mon Jul 09, 2018 7:26 am

Hi Jammy,

That did the trick ! It's working fine now. Thanks a lot!

Jouke

jouke
Posts: 5
Joined: Wed Jun 27, 2018 7:59 am
Contact:

Re: PX3 date and time problem

Postby jouke » Sun Jan 20, 2019 7:54 pm

Hello Jammy,

Could you provid me with the password needed to do a factory reset on this radio?

Thanks,

Jouke

Jammy
Posts: 6905
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: PX3 date and time problem

Postby Jammy » Tue Jan 22, 2019 9:19 am

There is no password needed for restore to factory settings.

gdwaynep
Posts: 1
Joined: Fri Apr 19, 2019 7:15 am
Contact:

Re: PX3 date and time problem

Postby gdwaynep » Tue Jun 11, 2019 12:48 am

The Password is 3368


Return to “Policy&Rules”

Who is online

Users browsing this forum: No registered users and 1 guest