First, please take knowledge about the button of Bluetooth page, see the image
- 4.png (253.34 KiB) Viewed 16831 times
Second, please open the Bluetooth app, if your car stereo can not display the Bluetooth name and paired password, see the image
- 1.jpg (2.82 MiB) Viewed 16831 times
Then you need to enter the car setting and input password 126 and change Bluetooth IC to BARROT-i1107e. then apply and exit. see the image
After exiting, please reboot your car stereo then try to connect Bluetooth.
Notice
1. Generally, we have tested ALL products before shipping, you do not need to change any value.
1. If you use password 126 enter the car settings, Please do not change any options in the car settings, because it will damage the car stereo and can not be recovered.
2. Bluetooth IC BARROT-i1107e only fit the CN27 series which was produced after February 2021.
- 2.jpg (2.86 MiB) Viewed 16831 times
Third. If your car stereo can display the Bluetooth name and paired password, please use your smartphone to search car stereo, you can refer to this video to do it.
Forth. If your car stereo can display the Bluetooth name and paired password, and you want to use your car stereo's Bluetooth to search for your smartphone's Bluetooth, please be sure that your smartphone is in Bluetooth APP, otherwise, the car stereo can not find it. about the operation, please refer video below
When your car stereo finds the smartphone's Bluetooth, but it can not jump the password on your smartphone, you need to use a tool to poke an RST hole to reset the car stereo and restart your smartphone.
Finally, if the following steps can not solve your questions, please contact the seller to get further support.