TIP3:CH06-10001B OPERATION GUIDE
Posted: Wed Jul 25, 2018 4:00 am
Recently some clients feedback that the mounting bracket doesn't fit the car,here we explain how to install the mounting bracket.
First, the headrest support is too thick to the bracket to lock in,in the situation,you have to replace the plastic teeth,we offer six different size of plastic teeth in the box.
Here you have to choose the thinner ones,note, the larger the number , the thinner the thickness,as shown in Figure 2.
Similarly,if the mounting bracket is not firm after installed,you have to replace the thicker plastic teeth.
First, the headrest support is too thick to the bracket to lock in,in the situation,you have to replace the plastic teeth,we offer six different size of plastic teeth in the box.
- 007.png (661.51 KiB) Viewed 9842 times
- 008.png (308.05 KiB) Viewed 9842 times
Here you have to choose the thinner ones,note, the larger the number , the thinner the thickness,as shown in Figure 2.
- 009.png (665.83 KiB) Viewed 9842 times
Similarly,if the mounting bracket is not firm after installed,you have to replace the thicker plastic teeth.