First situation,the disc coming out with clicks.
Remove those screws by using a cross screwdriver,take down the stent.
- 1.png (305.22 KiB) Viewed 809 times
Then remove those screws under the stent .
- 2.png (312.73 KiB) Viewed 809 times
Open the rear cover,then you can operation as follow.
- 3.png (233.91 KiB) Viewed 809 times
Second situation,the disc coming out with no clicks,refer to the above mentioned to dismantle the machine,then reinsert the plug make sure it touch well with board.
- 4.png (326.28 KiB) Viewed 809 times