CN10-01202B residual light

Moderators: Jammy, admin

Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: CN10-01202B residual light

Postby Jammy » Wed Jan 17, 2018 7:35 am

Hi,
pressing the power button just makes the unit in the standby mode,not a really power off.
Regards



User avatar
R909
Posts: 22
Joined: Sun Nov 26, 2017 10:05 am
Contact:

Re: CN10-01202B residual light

Postby R909 » Sun Jan 21, 2018 12:50 am

It's a very deep stand by ! Because it takes 20-30 seconds to turn on...

User avatar
R909
Posts: 22
Joined: Sun Nov 26, 2017 10:05 am
Contact:

Re: CN10-01202B residual light

Postby R909 » Mon Jan 22, 2018 9:43 pm

Today , new problem ... :?

https://youtu.be/B8fIyyuZkI4

Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: CN10-01202B residual light

Postby Jammy » Tue Jan 23, 2018 6:21 am

Hi, here is the firmware for your unit .You can have a try.And you can do as the video.
https://mega.nz/#!5JUkhTrQ!TzJVM1QuDCfh ... BfwUabE_Nc
https://www.youtube.com/watch?v=S8Go80q4LB0
Regards

User avatar
R909
Posts: 22
Joined: Sun Nov 26, 2017 10:05 am
Contact:

Re: CN10-01202B residual light

Postby R909 » Sat Jan 27, 2018 8:33 am

Hi,
After reset, the unit works properly.
Except that the backlight stays on if I let the + acc.
Regards.

User avatar
R909
Posts: 22
Joined: Sun Nov 26, 2017 10:05 am
Contact:

Re: CN10-01202B residual light

Postby R909 » Mon Jan 29, 2018 5:15 pm

Hi,
Yesterday, after one hour of operation, the sound cut on the front speakers.
I moved the fader and the sound came back ... New problem!
And today the unit did not want to start.
I had to make a reset again.
I think I will flash the firmware as soon as I have time.
I feel like a beta tester!
Regards.

User avatar
R909
Posts: 22
Joined: Sun Nov 26, 2017 10:05 am
Contact:

Re: CN10-01202B residual light

Postby R909 » Tue Jan 30, 2018 5:09 pm

Hi.

This is a video of residual light when I turn off the unit with the ignition on.

https://youtu.be/zX05floJNdI

If I turn off the ignition before the unit is turned off, no residual light.

I will put another video soon.

;)

Maricot
Posts: 1
Joined: Fri Jan 26, 2018 8:39 pm
Contact:

View first unread post

Postby Maricot » Wed Jan 31, 2018 9:58 pm

There is an icon just to the left of the thread title that takes you to the first unread post. It appears in the thread list page and not in the actual thread itself.

User avatar
R909
Posts: 22
Joined: Sun Nov 26, 2017 10:05 am
Contact:

Re: CN10-01202B residual light

Postby R909 » Thu Feb 01, 2018 7:51 pm

Hello,

This is what happens when I pulled out the car key when the screen retracts, no residual light.

https://youtu.be/dpqGjMMfNBE

Regards.

Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: CN10-01202B residual light

Postby Jammy » Fri Feb 02, 2018 7:45 am

Hi,
very thanks for your two videos.
We now find it is the software bug.Once there is solution for this,i will notice you here.
But first ,didn't the unit close the screen after you directly plug the car key out? if it is ,you should try to pull the car stereo out and exchange the yellow wire and the red wire from the power cable.
Normally,after you plug the key out ,the unit will close the screen and you will not find the weak light which you suffered .
Regards


[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable

Return to “Android System”

Who is online

Users browsing this forum: No registered users and 3 guests