Following are the steps of installing an aftermarket rear camera ( do not with CANBUS):
1. Stick the camera on the car tail.
2. Route the camera video cable to the front of the car.
3. Remove the car stereo cover.
4. Connect the new camera line with the CAM-IN line.
5. Test the camera to make sure everything works.
If with CANBUS, it needs to cut the reverse detection line (REVERSE) and connect the head of the connected machine to the lamp positive electrode.
This is how to route the camera video cable.（from 4:00)
Statistics: Posted by Jammy — Tue Oct 08, 2019 6:19 am
]]>