PUMPKIN CAR STEREO SUPPORT CENTER

Re: Need Firmware & MCU for ND0287B please help

2019-03-26T03:49:11

Please download this:https://mega.nz/#!ye4nGCAY!JbkUmsMDPStHpvTkXSDZQlxY8UTW5nwsBQGvzBPP6v8
Put it together with the MCU file we sent you yesterday.
Problem can be solved.

Regards,
Jam

Statistics: Posted by Jammy — Tue Mar 26, 2019 3:49 am

Re: Need Firmware & MCU for ND0287B please help

2019-03-26T01:57:48

OK,I think your experience is correct.
We will ask the factory send a new MCU to us.
Once we upload it to Mega,we will send you link.
Sorry for the inconvenience we caused.

Regards,
Jam

Statistics: Posted by Jammy — Tue Mar 26, 2019 1:57 am

Re: Need Firmware & MCU for ND0287B please help

2019-03-25T21:50:22

thanks for the links. in the mcu update, the device restarts and flashes over 10 times. then the radio starts. The buttons are now correct, but the resolution still does not fit. The picture is too big and goes over the edge of the display. the recovery mode and the boat screen is displayed too large. is the flashing after the mcu update normal? or maybe it's the wrong file? only when I installed the wrong mcu at that time the picture became too big for the display, i thought with the right one it will be normal again. since the firmware update is also below in red version Unmatch -01

Statistics: Posted by Simmens — Mon Mar 25, 2019 9:50 pm

Re: Need Firmware & MCU for ND0287B please help

2019-03-25T03:33:29

Hi,

We usually do not suggest flash firmware or MCU.
Because radio product have many restrictions, and it will break the warranty.
For firmware:https://mega.nz/#!HCQ2GQzQ!wrQs_iI_P9ZILw9lBzPVzFyn_SHiJqdx0TQTcqjstZg
Method:Put the nupdate.img file in the root directory of the sd card, insert the GPS card slot, click Settings - Expand Settings - System Upgrade
For MUC update:https://mega.nz/#!rLJHDCQC!LFk4BunIbi3qwRyS7ncGO8QROAI8cdJAzTEIcvUks2Y
Method: Do not decompress the file in the sd card root directory, insert the GPS card slot, click Settings - expand settings - mcu upgrade.
Hope you can fix the radio.

Regards,
Jam

Statistics: Posted by Jammy — Mon Mar 25, 2019 3:33 am

Need Firmware & MCU for ND0287B please help

2019-03-23T17:55:57

Hello i Need the Firmware for the ND0287B

Here is a link to see the Radio for that i need the Firmware https://www.autopumpkin.com/pumpkin-and ... -core.html

I made a Manually upgrade, but with wrong boot or MCU file, now the buttons on the side has wrong funktions and half of display go over the monitor, i dont have a backup.

Please send me the Correct firmware so i can have fun with this radio again.

Sry my english is not so good

Statistics: Posted by Simmens — Sat Mar 23, 2019 5:55 pm