https://mega.nz/#!9EljVZRC!zcFhEMAcOUiI ... 8FVlT0sKuo
Regards
Statistics: Posted by Jammy — Fri Nov 18, 2016 2:51 am
]]>
i found a way to sucessfully boot up that thing. Its working when i long press reset (about 20 seconds), then the leds are blinking white. now i press again about 4 seconds the reset button, the radio goes off. now i press the power button, and after ~ 15 seconds, the vw logo is shown, and the radio is booting up. but after i shutdown the radio, i cannot boot up anymore, and have to do the same prodecure with the reset button like written.
Can I maybe fix that thang when i'm at the android system?
Thanks,
Statistics: Posted by k0re — Thu Nov 17, 2016 2:03 pm
]]>
There must have some misunderstand between you and my colleague.
Please check if you send the email successfully and keep contact with her via email.
Or you can also contact the seller to return the unit back for repair.
Regards
Statistics: Posted by Jammy — Wed Oct 19, 2016 3:16 am
]]>
Ive written that Email before one Week but still no reply was wrote to me
Now the unit is broken now for more than a month
Please help me,
Thanks,
Statistics: Posted by k0re — Tue Oct 18, 2016 5:03 pm
]]>
If the unit even could not enter the recovery, please return it back to us for repair.
You can contact our customer service or write to "support@autopumpkin.com"
Regards
Statistics: Posted by Jammy — Fri Oct 07, 2016 10:05 am
]]>
Im sorry but that still does not working
İ Even cannot Enter the recovery...
What now?
Thanks,
k0re
Statistics: Posted by k0re — Sun Oct 02, 2016 5:48 pm
]]>
We had sent you two kind of power cable, one is with canbus box, the other is without canbus box.
Please use the power cable without canbus to check if the unit will turn on noramlly and try to use the way I told you to enter the recovery mode.
Here is the link of the firmware for your unit KD-C0346.
https://mega.nz/#!9EljVZRC!zcFhEMAcOUiI ... 8FVlT0sKuo
Regards
Statistics: Posted by Jammy — Mon Sep 19, 2016 3:01 am
]]>
i've cut the orange wire, now the screen does not get black, but the radio still stuck on boot logo. i also cannot enter the recovery mode, the leds on the left are blinking white, but the screen is black and no menu like in video is shown. what else can i do?
thanks,
k0re
Statistics: Posted by k0re — Sun Sep 18, 2016 12:01 pm
]]>
Regarding your issue, normally the unit display screen will become dimmer when you open up the headlights, but you can still see everything on the screen.
You can cut the orange illumination wire of the power cable from the side connected to our unit, then check if the problem happens.
And you can long press the RST hole about 10 seconds to get into the recovery mode.
Here is a tutorial video for your reference.
https://www.youtube.com/watch?v=B_lTLMDfOOs
Regards
Statistics: Posted by Jammy — Tue Sep 13, 2016 5:55 am
]]>
i've got a strange issue with the navi. Yesterday on the way driving home, i've opened up headlights, and then the navigation display gets black (but you can still switch songs, play, pause etc, but cannot see something on the screen).
After coming home, i've turned off the car, also the radio turned off, then i've cut the wire of the car battery, and put it back. Now i'm stuck on a so called bootloop, and i dunno how to get in the recovery mode, to flash the firmware and reset back to factory data.
Also i'vent got the firmware files. Could you please help me as soon as possible? I need the radio till saturday, I wanted to drive in holidays, but without car music / navigation that won't work.
Here are some details that I can tell you about my radio:
Model: KD-C0346
MCU: MTCB-KLD2
Resolution: 1024*600
Picture: http://news.autopumpkin.com/wp-content/ ... 113457.png
Thanks,
Statistics: Posted by k0re — Thu Sep 08, 2016 9:01 am
]]>