PUMPKIN CAR STEREO SUPPORT CENTER

Re: Need help for rq0546

2016-09-22T06:23:54

It did not work. he has installed the mcu. However, the image is not. Have tried several times now. If they have nothing against it I copy the thread for the support. Thank you very much for your effort. You helped me a lot.

Thank you.

Statistics: Posted by Turbine — Thu Sep 22, 2016 6:23 am

Re: Need help for rq0546

2016-09-22T03:22:35

Hi,
Normally the problem like you had can be solved by installing the firmware.
Would you mind take the last try and flash the unit with mcu file?
Here is the link for you.
https://mega.nz/#!FI9nXYjK!7Ms6pqWrj4bn ... q2EaCuxmds
If this still does not help, maybe the android board is broken.
Then you can contact our customer service or write to "support@autopumpkin.com" to return it back.
Regards

Statistics: Posted by Jammy — Thu Sep 22, 2016 3:22 am

Re: Need help for rq0546

2016-09-21T14:57:57

I still have no success. The sd card is a 16GB fat32 intenso. I have plenty of the error message in the recovery that it / nand_parameter can not open dev / block. Or place. I think that the partitions are moved. He can not rely on e: access. As can be seen in my video. I have now tried several images, including those of malaysk. The errors come when I go to the recovery. If I Radio Reboot then comes the ford logo and then optimizes the apps then it restarts and then I have a black screen with the status line above. When I hit something, the error message that has not recognized the ui.

How can I restore the partitions. I believe that these are the reason for the problems.

Statistics: Posted by Turbine — Wed Sep 21, 2016 2:57 pm

Re: Need help for rq0546

2016-09-21T03:45:20

Hi,
You can check if the SD card is FAT32 format within 32GB and it could be recognized by the unit in the SD card slot.
Please choose the third option "update system/mcu from sd card and clear all" when the unit enter into the recovery mode.
Or you can use the USB stick to copy the update.img file, and please choose "update system/mcu from usb and clear all"
Regards

Statistics: Posted by Jammy — Wed Sep 21, 2016 3:45 am

Re: Need help for rq0546

2016-09-20T13:51:19

Hello. I have the image on the sd card copied. but since the same error occurs as in the video above. Is there on the sd card in a specific folder structure or it must have a certain size. When my order no sd card was there. Have a bought later. I think the recovery program can not access the image. Thanks for your help.

Statistics: Posted by Turbine — Tue Sep 20, 2016 1:51 pm

Re: Need help for rq0546

2016-09-20T08:28:54

Hi,
Sorry for the trouble caused.
Regarding your issue, you can try to flash the item to solve it, here is the link of the firmware for your unit RQ0546.
https://mega.nz/#!gJNlTbwI!y_9pJo2Cuu0H ... dDQjBo8Lf8
Please download through your browser, copy the update.img file into the root inventory of the empty SD card, insert the SD card into the GPS slot.
Go to the recovery mode to choose the third option. Then check if the unit will turn on normally.
Regards

Statistics: Posted by Jammy — Tue Sep 20, 2016 8:28 am

Need help for rq0546

2016-09-20T04:38:58

Good Morning. I have a problem with my radio. It hangs in the boot logo. It happens more nix. Sometimes it goes up to the start menu, but as happens also nix. No apps, no pictures, I can not print anything. just a black screen. Up on the edge is the status line to see but also not respond. I'll be in the recovery purely but there appear to me lots of errors. Can you help me please. I have the following data for you:
MTCC kld6-v2.97
Android 5.1.1.
rk3188 800x480.

https://youtu.be/3dU25fxykl0
See Image pictures from version.

Please help me.
Sorry for my Bad english. Im a german.

Statistics: Posted by Turbine — Tue Sep 20, 2016 4:38 am