Press the power button and keep it pressed until the button lights are blinking.
Release the button shortly and press it shortly again.
The other way is to do the same with the reset micro switch on other units.
3rd way:
Unit and PC/Laptop needs to be in the same WiFi.
Setup ADB on your PC/Laptop and open CMD in the ADB folder.
Open developer settings on your unit and activate USB debugging.
Commands in ADB:
ADB connect 192.***.***.*** (use the IP address of your unit instead)
ADB reboot recoveryStatistics: Posted by Rigattoni — Sat Jul 18, 2020 10:34 am
]]>