PUMPKIN CAR STEREO SUPPORT CENTER

Re: Cotton in the dynamics

2017-05-27T07:23:06

Hi,
sorry for the late reply.
You would better contact the customer service of the website where you buy .
Also,you can write email to support@autopumpkin.com
Regards

Statistics: Posted by Jammy — Sat May 27, 2017 7:23 am

Re: Cotton in the dynamics

2017-05-24T05:23:24

Hi, could you tell me where to go , what customer service?

Statistics: Posted by maxxxam78 — Wed May 24, 2017 5:23 am

Re: Cotton in the dynamics

2017-05-24T02:30:09

Hi,
i agree that there are some components on mainboard should be broken.But we usually don't send components to our clients.
So you can contact the customers service to change a mainboard.
Regards

Statistics: Posted by Jammy — Wed May 24, 2017 2:30 am

Re: Cotton in the dynamics

2017-05-21T09:08:00

In the workshop it turned out that the clapping is likely to come from chips CSC37534. You must solder this chip or to change the whole Board with this chip. Can tell de you can buy this chip or the entire Board? Maybe the manufacturer will be able to send me these components?

Statistics: Posted by maxxxam78 — Sun May 21, 2017 9:08 am

Re: Cotton in the dynamics

2017-05-15T10:25:32

Everything is connected correctly.

Statistics: Posted by maxxxam78 — Mon May 15, 2017 10:25 am

Re: Cotton in the dynamics

2017-05-15T09:43:27

Hi,
please check whether the gray wire from our unit ISO cable connect to the gray wire from the car or not.and check whether the gray black wire from our unit ISO cable connect to the gray black wire from the car or not.If not,please change it as i describe.
Regards

Statistics: Posted by Jammy — Mon May 15, 2017 9:43 am

Re: Cotton in the dynamics

2017-05-15T07:15:41

Nissan Sentra B17 2015

Statistics: Posted by maxxxam78 — Mon May 15, 2017 7:15 am

Re: Cotton in the dynamics

2017-05-12T05:06:19

Car model Nissan Sentra B17, 2015. And what a room block is needed?

Statistics: Posted by maxxxam78 — Fri May 12, 2017 5:06 am

Re: Cotton in the dynamics

2017-05-12T03:00:55

Hi,
sorry for that i forgot to ask you what your car model number and the order number of the unit is.
Regards

Statistics: Posted by Jammy — Fri May 12, 2017 3:00 am

Re: Cotton in the dynamics

2017-05-11T17:50:15

Hello, speakers sometimes changed the factory settings restored, nothing helped, popping remained. Video know. https://youtu.be/_SoM6DBn6JY

Statistics: Posted by maxxxam78 — Thu May 11, 2017 5:50 pm

Re: Cotton in the dynamics

2017-05-08T05:57:02

Hi,
For the sound problem,please first check the right front speaker is normal.You can connect the wires of the right front speaker to the left front speaker wires of the ISO cable. And if you confirm the right front speaker is OK, so try to restore factory settting. If this don't help,could you mind show me a short video about your problem. We try to help you.
Sorry for that there is not electrical schematic here because the factory don't provide that to us .
Regards

Statistics: Posted by Jammy — Mon May 08, 2017 5:57 am

Cotton in the dynamics

2017-05-05T18:52:35

After installing the radio in the car from the right front speaker began to hear clapping. The popping heard when you turn off the radio, pressing the button mute and the volume is decreased to 0. Amplifier no. With regular radio no cotton. When you connect to the line out leads on cotton too. Radio RQ0278E. Help to understand! Need of the electrical schematic for the sound.

Statistics: Posted by maxxxam78 — Fri May 05, 2017 6:52 pm