First. Remove those screws by using a cross screwdriver,take down the stent.
![5.png](./download/file.php?id=1445&sid=38a4b3449bf54ea3647af0e1d8df4cc0)
Then remove those screws under the stent .
![6.png](./download/file.php?id=1446&sid=38a4b3449bf54ea3647af0e1d8df4cc0)
Second.Open the rear cover, press the lens to the bottom (pay attention to the internal wiring, don't broken the horn line, careful operation).
![7.png](./download/file.php?id=1447&sid=38a4b3449bf54ea3647af0e1d8df4cc0)
Third.Use the cross screwdriver into the slot,inside-out raise carefully.
![8.png](./download/file.php?id=1444&sid=38a4b3449bf54ea3647af0e1d8df4cc0)
Fourth .At the same time of raising the screwdriver,holding the disc by band and Slowly push out the Disc.
When you're finished,take out the Disc normally,then power on the Headrest,Re-insert the Disc,after that press the EJECT button,test whether it will reappear the previous problem.If it returns to normal,install the Headrest According to the original way.Statistics: Posted by Jammy — Thu Jul 20, 2017 3:51 am
]]>