PUMPKIN CAR STEREO SUPPORT CENTER

The constant power on pin 16 might perhaps cause the battery drain problem? I found a diagram that I think is correct for my original radio.

skoda radio.PNG (64.08 KiB) Viewed 1979 times

Hi! The vehicle is a Skoda Octavia 1,9 TDI, 4x4 2007. It had original navigation. See attached picure for original plug. You can see the red/white and brown wires as explained in previous post. Both red/white wires have 12V all the time, even without the key. 20170607_193927.jpg 20170607_194517.jpg ...

Hi! Unfortunately it didnt work. The HU turned on with #3 dip switch off, but no canbus decoding. I notice that there is a small "reset" Hole on the front at the lower right. Is it any point to push "reset"? I think there must be something wrong with the HU. As I told before, the...

Both pin 15 (B+) and pin 16 (ACC) in the original 40-pin connector is constantly powered, regardless of the position of the key. Also powered with the key removed. Both wires are red with a white strip. There is one red wire, but this is pin 3, labelled FR+ There is a 6-pin plug with wires on the ba...

I think my cigarette lighter is powered with the ignition off. Which red wire do you mean to cut? I think there is a wire called ACC+ on one of the breakout cables, can this be used?

Red wire going into the big connector?

I have now found some threads regarding this issue. If I turn on DIP-SW #3 the HU turns on again! I have no longer any CANBUS information, like open door, or park sensors, and the HU can be turned on and off with the power-button regardless of position of the ignition key. Is it the HU that is the p...

Hi! I mounted my new CN03-03101B-US-A head unit a few days ago, and everything worked ok. Though I noticed that the radio turned off after a few minutes when the engine was not running (the key in the position before ignition). I think it was ok when the engine was running, but I have only driven fo...

Thanks! It looks like MCX female on the DAB+ box. Now I`m able to get the correct adapter cable :-) https://en.wikipedia.org/wiki/MCX_connector#/media/File:MCX_Male%26Female.jpg I need 12V for the active roof antenna. The antenna can use phantom power from the head unit (12V injected on the head uni...

[quote="cyberkul"]Hi!
I`m interested in purchasing , and

Corrected the links...