10.1" android stereo sound problems

[benson1963]

hi Jammy , one other strange thing that happened after i had connected the steering wheel control buttons they all worked ok but when out driving the other day the head unit switched itself on by itself with no one touching "power on" button ? i switched it off but it came back on by itself twice after this , then steering wheel buttons failed to work properly and on the key learning they would not pair properly again , ended up re-setting the key learning and after that the head unit has not switched on by itself again ? , i have not tried to set the steering wheel buttons again after this happened , can this be also related to the other problems i am having ? thanks again for your help .

regards - Tommy

[Jammy]

Hi,
For the bluetooth problem,you need to set your BT type as "WQ_BC6".

QQ截图20170808110434.png (524.88 KiB) Viewed 7845 times

For the Wifi problem,do you check whether the USB port normal or not? You can just try to use a USB stick .
For the sound and steering wheel control ,please record a video to us so that our enginer can help you solve theproblem.
Regards

[benson1963]

[Jammy]

Hi,
Thanks for your video.
Do you mean everything including wifi,bluetooth,steering wheel control and music sound all normal before installed the reverse camera?
You can try to flash the unit with following firmware.
https://mega.nz/#F!cd1XEQBT!bpFEJtpzJBgi0mYQEWukNA
If this still doesn't help,you can contact the customer service where you bought the unit to return to us for repairing.
Thanks for your feedback again
Regards

[benson1963]

hi Jammy , will try to flash the unit and let you know what happens , do not know whether it was just coincidence or not but the sound , bluetooth and wi-fi did indeed work before i installed the reverse camera , i paired the steering wheel controls after the camera was installed and they worked fine at first but do not work or pair properly now , not sure why the faulty camera would have this effect on the rest of the head unit ? what explanation did the technicians give ? , the head unit now also does not save the time and date when switched off but it is correctly wired to the positive and switched positive wires from the car ?if the unit has to be sent back does it need to be returned to China ?

regards - Tommy

[benson1963]

hi Jammy , i did as you said and used the "flash" file , it installed 100% ok but the head unit still does not work properly , no sound , no wi-fi , no bluetooth etc. , is my head unit still under warranty ? , if it has to be sent back how do i do this ?

regards - Tommy

[Jammy]

Hi,
It is strange and the engineer need to analyze your unit and .
you can contact the customer service where you bought the unit for the repairing issue.
Regards

[benson1963]

hi Jammy , i have sent a message to customer services regarding sending the head unit back for repair , can you give me an idea of how long these repairs will take ?

regards - Tommy

[Jammy]

Hi,
it doesn't take long time.Most of the time is the logistic time.
In addition,regarding the steering wheel control problem,you need not to connect to the can bus box.You can just connect the wire "key1"or "key2" of the rear ISO cable to the connector "steering wheel remote" of your car.

QQ图片20170811133336.png (73.33 KiB) Viewed 7818 times

[Thomas77]

Hi

I looked into my car (peugeot partner 2014 07) with a Pumpkin 2 din android 7.1 head. If I choose this, I would like to use the steering wheel control and I would need the backrest radar sound.
I checked the CTSPG007.2 (Connects2) for the steering wheel and the CTRPG001 (Connects2) for the parking radar. Do you think this would be the voice of the steering wheel and the parking guard?
Do I need these at all? If so, is there a cheaper but more similar product?

Thanks in advance for your answer