This is for the Android 5.11-RQ1129E-US-A
2006 BMW 330XI
So I installed the unit....totally custom btw since you guys wont get a Fiber Optic converter. this one (
http://xtrons.com/fob01-optical-fiber-h ... -benz.html) works just fine. I had to do a little custom work since the jackass i bought it from didnt provide a wire harness connection.
Just for a record the wire harness for a N6-MOST, FOB01, FOB02, you will need a Molex Micro 8 Pin 0430250800 $.20 and Molex 79758-0010 (pre made Molex wires and pins) $.38 x 8I I used all 8 connections just to make sure.
But the wires go X-ACC-Ground-Battery Constant
X-Red RCA-RCA Ground-RCA White
I spliced into the Pumpkin Harness to connect to the Blue ACC wire and the ground and then ran contestant power to to my fuse box and connected to the door lock fuse, mine was #56, I used a Add-A circut bought at AutoZone for $6.00
Now for the Heated Seat and Parking assistance controls. Crutchfield has a Metra 98-9306 Dash Kit ($19.99) that will allow the seat controls to be relocated to the ashtray. I will lose the cigarette lighter which sucks but I found another option but I need a better price.
Also dont listen to the guy at Dynanavin or J & T distributing, The fiber adapter will work. The radio being sold by Pumpkin,Eanon and Dynanavin are all the same, software may be different but the hardware is the same.
If I was Pumpkin I would buy a whole lots of those Fiber Optic converters and make the harness compatible.