Page 1 of 1
Steering controls on citroen berlingo 2010
Posted: Fri Jan 18, 2019 8:14 pm
by Neilt
Hi. Can you tell me if I'll need one of the connect2 leads to keep steering wheel controls on a 2010 citroen berlingo or is it possible without?
Re: Steering controls on citroen berlingo 2010
Posted: Mon Jan 21, 2019 1:29 am
by Jammy
Hi,sorry that i first need to get your order number so that i can confirm your unit model and provide you correct advice .
Regards
Re: Steering controls on citroen berlingo 2010
Posted: Mon Jan 21, 2019 10:07 am
by Neilt
Hi Jammy, I don't have an order number - the stereo was a gift. I believe is was bought on ebay and is a ND0293.
It's android 8, 2GB, 32GB
Kernel Version 4.4.103
MCU CSN2_1122018_153527
I've gone ahead and got the connect2 lead and the steering controls are working. I have 2 issues though
1) Radio stations will only save for a short time. After the car has been off for a while the stations are lost
2) The unit sometimes will not power on (even the button lights are not lit up). The unit will then run on for a second and then loose all power again. It does this a few times and will then come on and stay on. It seems like when the car has been off a while it has the issue.
How do I check I have the latest firmware?
Thanks,
Neilt
Re: Steering controls on citroen berlingo 2010
Posted: Tue Jan 22, 2019 6:30 am
by Jammy
Hi, 1. did the unit display the power off info while you plug out the car key? If not, you need to plug out the unit and exchange the yellow wire and red wire from the ISO cable back of the unit.
2.you can reset the unit by using an thin stick to click the reset button on the panel of the unit.
3.you can check the build number option in the about system info.
Regards