Page 1 of 1
Where can one get a mate for the ISO adapter? What is the ISO adapter specification?
Posted: Wed Apr 19, 2017 1:17 am
by rjt
What is the name of the the black twin block of 8 conductors each? The other end of this double connector wire bundle plugs directly into the back of the Pumpkin 27-AQTU73. What is the name of the female mate? I would like to connect the wires to a female mate so that it is easy to disconnect.
Re: Where can one get a mate for the ISO adapter? What is the ISO adapter specification?
Posted: Thu Apr 20, 2017 2:47 am
by Jammy
Hi,
This connector is derectly connected to original universal port for car radio.We usually call it universal ISO connector.
Regard.
Re: Where can one get a mate for the ISO adapter? What is the ISO adapter specification?
Posted: Thu Apr 20, 2017 5:28 am
by rjt
Metra 70-1784 is what comes with the Pumpkin.
Metra 71-1784 is its mate.
It is common on German cars such as Volkswagon, Audi, BMW - so a junkyard has tons of these. i cut mine out of a German car from the junkyard.
- JunkyardFindCarSideOfHarness.jpg
- UPullitReceiptForVWsideHarness.png (3.09 MiB) Viewed 2831 times
Some techs refer to it as a "Reverse Wiring Harness".
Most US based automobile car stereo installers seemingly refuse to work with these adapters, they prefer to cut off the end, and splice.
http://www.metraonline.com/part/Audi_Vo ... ss_71-1784http://www.hifisoundconnection.com/Metr ... wAodrOsPhAhttp://m.oreillyauto.com/h5/r/www.oreil ... &ppt=C0107https://www.walmart.com/ip/New-Metra-71 ... 3=&veh=sem
Re: Where can one get a mate for the ISO adapter? What is the ISO adapter specification?
Posted: Fri Apr 21, 2017 12:50 am
by rjt
There must be a complete pinout diagram of this ISO connector already here on the forum, but where?
First HERE on the forum:
and now reposted:
- 27-AQTU73 Harness Pinout Diagram Guide
- 27-AQTU73-Harness-Pinout-Diagram.png (264.49 KiB) Viewed 2825 times
Re: Where can one get a mate for the ISO adapter? What is the ISO adapter specification?
Posted: Fri Apr 21, 2017 6:35 pm
by rjt
Another part number is MEC711784, but appears the same:
I would like a a table of pin numbers/color to function.
Re: Where can one get a mate for the ISO adapter? What is the ISO adapter specification?
Posted: Tue Apr 25, 2017 6:38 am
by Jammy
Hi,
sorry for the late reply .
I am puzzled by your problem .
Do you mean that there is not a suit connector in your car for our power cable of the unit?
Could you tell us your car model number ? We try to help you.
Regards
Re: Where can one get a mate for the ISO adapter? What is the ISO adapter specification?
Posted: Sat Apr 29, 2017 7:14 pm
by rjt
I have a 2006 Toyota Sienna MiniVan. In the USA, only German cars have this international standard organization adapter. I went to the junkyard, found a Volkswagon and cut out the wiring harness inside the vehicle. Then i did not have to splice into wires on the vehicle or radio.
Re: Where can one get a mate for the ISO adapter? What is the ISO adapter specification?
Posted: Wed May 03, 2017 9:25 am
by Jammy
Hi,
sorry ,it takes so long time and i still can't help you solve the problem.
Do you mean you now need a complete pinout diagram of this ISO connector so that you can connect the wires to your car?
But the diagram you attach before is the complete one,so i don't know how to help you.
For the ISO adapter problem,in my opinion,you can buy one from ebay.
Here is the link.
http://www.ebay.com/itm/Toyota-Camry-87 ... xy4fBTku2LHope to help you.
Regards.
Re: Where can one get a mate for the ISO adapter? What is the ISO adapter specification?
Posted: Thu May 04, 2017 12:04 am
by rjt
ISO 10487 is what I was looking for. WikiPedia has a description and pictures:
https://en.m.wikipedia.org/w/index.php? ... elcome=yesRaspberryPi Car PC website provides the harnesses needed upon providing a car.
http://i-carus.com/woulditfit/?model=356