[SWC]How to connect the wireless steering wheel remote controller on Pumpkin Headunit
Posted: Mon Feb 01, 2016 10:51 am
If you bought the following picture showed Pumpkin steering wheel remote controller from us, you may curious how to connect the wiring, because it is require to do wiring modification to connect.
First please make sure the remote controller part installed with CR2025 battery.
Then make sure those wires are connected correctly as the following photo shows.
Note: the black wire on the following photo shows is arieal for the receive box, please do not connect it to ground or any other wire.
Then you go to the steering wheel learning program on the headunit to map each buttons as the following video shows:
First please make sure the remote controller part installed with CR2025 battery.
- install-battery.jpg (58.3 KiB) Viewed 18685 times
Then make sure those wires are connected correctly as the following photo shows.
- wiring-connection.jpg (86.22 KiB) Viewed 18685 times
Note: the black wire on the following photo shows is arieal for the receive box, please do not connect it to ground or any other wire.
- antenna-ariel.jpg (73.79 KiB) Viewed 18685 times
Then you go to the steering wheel learning program on the headunit to map each buttons as the following video shows: