CN10-01202B residual light

[R909]

Hi Jammy,

Thanks for your answer.

The red and yellow wire are correctly connected.

The unit closes the screen when I pull out the car key and no residual light.

My other problems are more annoying. (boot problem, sound that cuts on the front speakers and returns when you move the fader).

See my message of january 29th.

Regards.

[Jammy]

Hi,
it seems that it is an occational issue.If you mind this ,you can contact the customer service for the next solution.
Hope your kind understanding.
Regards

[R909]

Hello Jammy

I have another problem, each time I turn on, I have the window "extras settings" that opens.
I have to manually close it to have the radio display.
Is there a solution?

Regards.

[Jammy]

Hi,

So,I know the problem reason this time.
You connected a wrong wire of your car radio.
Please find the "ILL" cable in the ISO cable,and please connect it to your car Automotive lighting control cable.
Thank you.

Regards,
Jam

[R909]

This is strange, because the "ILL" wire is connected to the dashboard lighting.

The screen brightness decreases when I turn on my headlights.

I'm going to unplug this wire to try.

[R909]

Hello Jammy.

I unplugged the wire "ILL" and I still have the window "extras settings" that opens when the car radio starts.

Is there an update that could fix this problem?

Regards.

[Jammy]

[R909]

I still have the problem, with or without the connected wire.


Do you have the firmware for flash it?

[Jammy]

Hardware problem.

[R909]

Can I have the links to try a reinstallation?

Thanks.