Page 1 of 1
Have to push the Buttons twice
Posted: Tue Oct 18, 2016 5:35 am
by mentox
Good Morning from Germany
i have two Devices on 4.4.4 and one 5.1 for Volkswagen.
I have to press the buttons twice that they work.
After some Press they work correctly.
Is this a known bug?
is it possible to fix it?
best regards
Dominique
https://www.amazon.de/gp/product/B015E4E3G8Here the infos from my 4.4.4 Unit
Model S07
MCU MTCB KLD6 V2.86 (Mar 21 2016)
Android 4.4.4_29032016
Kernel 3.0.36+ root@chun #829
Build rk3188-eng4.4.4 29032016.17:20:05
CPU ARM Cortex A9 @ 1.6 (x4)
RAM 1024 MB
Re: Have to push the Buttons twice
Posted: Tue Oct 18, 2016 7:09 am
by Jammy
Hi,
Could you please tell us which device has the button issue?
It maybe the button stuck or the system has a delay response.
Does the problem happen again?
If possible, would you mind take a short video to help us check?
Regards
Re: Have to push the Buttons twice
Posted: Tue Oct 18, 2016 8:19 am
by mentox
Hi
both have the Problem.
It happens after every start of the System.
it doesnt matter if i press directly after boot or wait some time.
i try to make a video. where can i upload the video?
best regards
Re: Have to push the Buttons twice
Posted: Wed Oct 19, 2016 3:02 am
by Jammy
Hi,
The operation system cold boot time takes 25-30 seconds, sometime it may need more a little seconds.
Just like the operation system boot, the button board circuit may also need a short time to react.
You can make a video, upload it to youtube, make it public, then send the link to us.
Regards
Re: Have to push the Buttons twice
Posted: Wed Oct 26, 2016 7:49 pm
by hairy46chad
I have the same issue.
Everything works ok, you just have to oress the button twice for it to work most of the time. Its almost like the 1st press wakes it up, then the 2nd press works
Re: Have to push the Buttons twice
Posted: Thu Oct 27, 2016 5:22 am
by JoergH
Same issue with RQ268.
All the time with the Navi Button. It doesn't matter if i press 5 seconds after appearing home screen or 2 minutes.
After first start (and sometimes also closed navi app), the Navi button starts / switch to the navi app immediately after a single press!
Re: Have to push the Buttons twice
Posted: Fri Oct 28, 2016 2:08 am
by Jammy
Hi,
About the button issue, sometime you may press it in the improper position or the button signal has a little delay, sorry about this.
You can press the RST hole to restart the unit to check.
If it still does not help, please take a short video and send it to us.
We will check if it's the software problem or the button hardware problem.
Regards