PUMPKIN CAR STEREO SUPPORT CENTER

Hello,

I encounter some problems with my car stereo.

- wifi does not automatically connect to the access point.
- From time to time, at startup, the SD card appears to be corrupted.

I did a factory reset, but it does not change anything

SKU: CN10-01201B-FR1-FBA
order number Amazon : 405-6904303-1365903

Best regard,

Nicolas Thiennet

Hi,
For the wifi connect problem,it is a system bug.You can flash the following firmware for the unit CN10-01201.
https://mega.nz/#F!kc1ySQSC!yF9U91PU-0JhLIlaEKBbig
For the SD card recognize problem,the unit might display this info before finishing start up.Does the sd card can't be read after the unit start up?
Regards

Hi,

I have the same problem and I will install the new firmware you have published here. But I can see four files in Mega Link.... Could you explain how can I install the firmware, please?

Thanks!

Hi,
you just need to place all the files on the root content of the sd card.
Insert the sd card into the unit ,the unit will recognize them and lead you to install it.If not,you can enter settings---car settings---system update page.
Regards

Sorry for the late response.
Thank you very much, this update fixes the problem.
Regarding the problem with the SD card, the SD card was of poor quality.