Bluetooth Connection Issues - Engine Tuner iQuad
Posted: Wed Mar 14, 2018 1:31 am
Hello,
I recently purchased and installed you 10.1" 2din dash (607128771333). The head unit started up fine and connects to my iphone via bluetooth, but I am having troubles connecting to my iQuad (Quadzilla Adrenaline) control module: http://quadzillapower.com/1998-5-2000-d ... h-iquadbt/
The iquad unit runs off of bluetooth and we have had success connecting it to an android phone. However, we are unable to connect it to this head unit. Below is a video of the issue.
https://drive.google.com/open?id=1VxrAe ... zJCZknoU1g
As shown in the video, we have entered the device's bluetooth settings and changed the pin from the stock "0000" to "1234" to match the iquad unit we are trying to pair to. We have tried to pair both with the engine off and the engine running. Also, we were sure that there were no other devices connected to the head unit or iquad while trying to pair. We can get the iquad to show up as an "available device" but when pressing the pair button, nothing happens. Do you have any suggestions on how to fix this issue?
I recently purchased and installed you 10.1" 2din dash (607128771333). The head unit started up fine and connects to my iphone via bluetooth, but I am having troubles connecting to my iQuad (Quadzilla Adrenaline) control module: http://quadzillapower.com/1998-5-2000-d ... h-iquadbt/
The iquad unit runs off of bluetooth and we have had success connecting it to an android phone. However, we are unable to connect it to this head unit. Below is a video of the issue.
https://drive.google.com/open?id=1VxrAe ... zJCZknoU1g
As shown in the video, we have entered the device's bluetooth settings and changed the pin from the stock "0000" to "1234" to match the iquad unit we are trying to pair to. We have tried to pair both with the engine off and the engine running. Also, we were sure that there were no other devices connected to the head unit or iquad while trying to pair. We can get the iquad to show up as an "available device" but when pressing the pair button, nothing happens. Do you have any suggestions on how to fix this issue?