Firmware update?

Technical file download link of PUMPKIN device

Moderators: Jammy, admin

Flashtek
Posts: 8
Joined: Sat Jan 07, 2017 4:08 pm
Contact:

Re: Firmware update?

Postby Flashtek » Sat Jan 14, 2017 1:07 pm

After the update
Attachments
20170113_180718.jpg
20170113_180718.jpg (3.18 MiB) Viewed 1724 times



trappolo72
Posts: 9
Joined: Sat Dec 22, 2018 7:10 pm
Contact:

Re: Firmware update?

Postby trappolo72 » Sun Dec 23, 2018 6:24 am

I buy on amazon.it pumpkin nd0294b and i have some problem with wifi and bluethoot. There is a firmware update can fix? I make i screen photo of actual firmware. Thanks Andrea
Attachments
20181222_173426.jpg
20181222_173426.jpg (4.31 MiB) Viewed 1439 times

Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: Firmware update?

Postby Jammy » Mon Dec 24, 2018 3:02 am

Hi,what is going on with the wifi and Bluetooth ? Maybe it needn't flash the firmware.
Regards

trappolo72
Posts: 9
Joined: Sat Dec 22, 2018 7:10 pm
Contact:

Re: Firmware update?

Postby trappolo72 » Mon Dec 24, 2018 6:20 am


Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: Firmware update?

Postby Jammy » Tue Dec 25, 2018 1:45 am

Hi,
you can first try to clear up the the wifi connection record and then search and reconnect again.
If it doesn't help, here is the firmware.
https://mega.nz/#!mbpVVCDL!bXRaFjF8gjg9 ... rivuqXY0vU
Please download the files to the root content of one sd card and insert it into the GPS slot ,then enter settings - system - system update.
Wait for your feedback .
Regards

trappolo72
Posts: 9
Joined: Sat Dec 22, 2018 7:10 pm
Contact:

Re: Firmware update?

Postby trappolo72 » Fri Jan 04, 2019 10:52 am

hi Jammy now i change boot logo as you indicated me by pressing 888 code then i reboot the car audio and it freeze on pumpkin logo and car audio don't start ang go in loop mode. i have to restore the firmware that you send me pressing reset and power combination? thanks here is the image of my loop
Attachments
nd0294b freeze.jpg
nd0294b freeze.jpg (2.85 MiB) Viewed 1371 times

trappolo72
Posts: 9
Joined: Sat Dec 22, 2018 7:10 pm
Contact:

Re: Firmware update?

Postby trappolo72 » Fri Jan 04, 2019 11:31 am

i try to enter in the root mode but it say me system update e nothing happen as in the picture below
Attachments
20190104_115907.jpg
20190104_115907.jpg (3.25 MiB) Viewed 1368 times

Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: Firmware update?

Postby Jammy » Mon Jan 07, 2019 10:04 am

Hi, you can first only click the reset button to reboot the unit . If it doesn't boot , then flash the firmware.
When flashing the firmware, please try your best to use an empty sd card or USB stick (has been formated). There mighe be any virus on your sd card or USB stick which cause the failure of flashing procession .
Regards

trappolo72
Posts: 9
Joined: Sat Dec 22, 2018 7:10 pm
Contact:

Re: Firmware update?

Postby trappolo72 » Mon Jan 07, 2019 11:25 am

Can you tell me the procedure? I just have original firmware kupdate.zip thanks
ps. i put kupdate.zip in a new usb key then i press reset and power button then release reset e press only power button and start update but nothing happen all freeze

Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: Firmware update?

Postby Jammy » Wed Jan 09, 2019 3:55 am

Hi, you also can refer this video to flash again .https://youtu.be/kf21Uc0iEEs
Regards


[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable

Return to “File Download”

Who is online

Users browsing this forum: Bing [Bot] and 1 guest