RQ0278E Forgets Settings and no Fast Boot

Technical file download link of PUMPKIN device

Moderators: Jammy, admin

[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable
notb668
Posts: 5
Joined: Fri Feb 03, 2017 12:05 am
Contact:

RQ0278E Forgets Settings and no Fast Boot

Postby notb668 » Mon Feb 06, 2017 9:33 pm

Hi
I have just installed the RQ0278E.
1. The device takes 30 secs to boot each time. Do I have to enable fast boot somehow?

2. When turned off and on, all radio stations are lost as well as time. Time returns as it is picked up from GPS, but not the radio.

3. I have an ELM 327 ODBII dongle and the head unit can find the dongle, but will not pair due to "Incorrect PIN". There is no option to enter a PIN, it just tries to pair automatically and I assume using "0000". It may need to use "1234". Can this be changed?

Other settings seem ok, such as steering wheel, boot logo and wifi password.

Can you help?

Thank you.



Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: RQ0278E Forgets Settings and no Fast Boot

Postby Jammy » Wed Feb 08, 2017 1:56 am

Hi,
For the settings forget and no fast boot, I think the red and yellow wire position from our ISO power cable and your original cable are not coincident.
Please refer our another forum to check, hope some help.
viewtopic.php?f=3&t=19
For the OBD2 dongle pair code, you can go to the Bluetooth menu on our unit, then change the pair code from 1234 to 0000.
Then reboot the unit and try to connect the OBD2 dongle again.
Here is a tutorial video for your reference.
https://www.youtube.com/watch?v=UKs39VkFp7A
Regards

notb668
Posts: 5
Joined: Fri Feb 03, 2017 12:05 am
Contact:

Re: RQ0278E Forgets Settings and no Fast Boot

Postby notb668 » Wed Feb 08, 2017 3:09 am

Hi Again
Thanks for the reply. I have since discovered the yellow/red cable switch on the Pumpkin head unit and the Bluetooth PIN config.
ODB now works well and I can listen to bluetooth music at the same time!

The fast boot only seems to work with power off for a limited time (<1 hour?). If left for a few hours, the unit needs to reboot from scratch. Is this a setting (power save?).

Also, the factory settings have customer 1 & customer 2, what are these for?

Thanks, Dean

notb668
Posts: 5
Joined: Fri Feb 03, 2017 12:05 am
Contact:

Re: RQ0278E Forgets Settings and no Fast Boot

Postby notb668 » Wed Feb 08, 2017 3:20 am

Thanks for the youtube link, but for the RQ0278E, the settings is not the location to change the PIN, there is a separate bluetooth app, that is used for the pin. Importantly, if this is changed to connect to the ELM327 ODBII (it is 1234, not 0000), then you need to repair any other devices like mobile phone.

Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: RQ0278E Forgets Settings and no Fast Boot

Postby Jammy » Wed Feb 08, 2017 8:40 am

Hi,
For the fast boot function, it work when the yellow memory wire of the power cable get a few current from the car battery.
There is not a setting for fast boot.
The customer 1 and customer 2 are used for testing by factory technician and developer, you don't need to use it and it does not matter with any function.
Please don't change any factory setting without our instructions.
Regards

notb668
Posts: 5
Joined: Fri Feb 03, 2017 12:05 am
Contact:

Re: RQ0278E Forgets Settings and no Fast Boot

Postby notb668 » Wed Feb 08, 2017 8:51 pm

OK thanks

How long does the fats boot work for without turning on? What is the time-out?

Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: RQ0278E Forgets Settings and no Fast Boot

Postby Jammy » Thu Feb 09, 2017 6:02 am

Hi,
The fast boot should work without time-out limitation as long as the yellow memory wire get power from your car battery, even if you turn off the unit or pull out the car key.
Regards

sal
Posts: 14
Joined: Thu Mar 30, 2017 2:31 pm
Contact:

Re: RQ0278E Forgets Settings and no Fast Boot

Postby sal » Thu Mar 30, 2017 2:39 pm

Sorry, I don't understand, how I have to change the pin on the head unit (RQ0278E).
I have an iCar III (Vgate), and I can't connect the ODB-Connector, because the PIN isn't correct.

Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: RQ0278E Forgets Settings and no Fast Boot

Postby Jammy » Mon Apr 10, 2017 1:42 am

Hi,
Sorry for the late reply.
For the Bluetooth pair pin, you can go to the Bluetooth menu settings, set the pin as same as the iCar III.
If you change the pin but it still could not connect to your iCar III, it's possible that they are not compatible, sorry about this.
But we also sell two kind of the Bluetooth OBD adapter which confirm to be compatible with our unit.
You can buy a new one from us, sorry for the inconvenience brought to you.
Regards


[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable

Return to “File Download”

Who is online

Users browsing this forum: No registered users and 5 guests