Firmware

Technical file download link of PUMPKIN device

Moderators: Jammy, admin

[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable
lamcote
Posts: 3
Joined: Sat Feb 11, 2017 8:52 am
Contact:

Firmware

Postby lamcote » Sat Feb 11, 2017 8:57 am

I bought this last week:

Pumpkin 2GB RAM Android 5.1 Lollipop 1024*600 Quad Core Double Din In Dash Car Radio Stereo Bluetooth GPS 64GB USB / SD Subwoofer DVR OBD2 Mirror Link [ASIN: B01N2G2A6P]

It now won't boot up properly unfortunately. Please could you let me have the latest firmware for this?

Thanks



Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: Firmware

Postby Jammy » Mon Feb 13, 2017 7:05 am

Hi.
Sorry for the trouble caused and the late reply due to the weekend.
Regarding your issue, normally you can install the latest firmware to solve it, here is the link for your unit.
https://mega.nz/#!FF8E0bAb!SgNvVjn3HxvI ... cr1BPDo304
You just need to download it through your browser, use a SD card or USB stick(not up to 32GB) to copy the rar update file, don't unzip it.
Then insert the SD card or USB stick into the unit.
Then turn on the unit, press the power button and keep it for 3-5 second, loose it and short press it at once, then wait for a few seconds, then the unit will enter the recovery mode, please choose to update the system from SD or USB.
Regards

HbkvsHHH
Posts: 1
Joined: Mon Feb 13, 2017 6:56 pm
Contact:

Re: Firmware

Postby HbkvsHHH » Mon Feb 13, 2017 9:22 pm

I bought a p07 pumpkin it keeps freezing on start up and will not allow me to turn on wifi. Everything else works. Is there a new firmware I can get for this or even the one that was put in by factory. I just got this yesterday and love it. Don't want to go threw the hassle of taking it out and sending it back to amazon. Please help I know how to install the firmware been doing it for awhile. My personal email is bundybuck@aol.com. I also need map firmware the map card was not in box. Thanks so much.

Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: Firmware

Postby Jammy » Thu Feb 16, 2017 10:21 am


lamcote
Posts: 3
Joined: Sat Feb 11, 2017 8:52 am
Contact:

Re: Firmware

Postby lamcote » Fri Feb 17, 2017 10:12 am

Hi, I have applied the update.zip but it still goes back to optimising apps when it boots up and before it completes optimisation it switches itself off....!!! Not looking good.

Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: Firmware

Postby Jammy » Tue Feb 21, 2017 10:30 am

Hi,
You might fail to apply the update file, cause the unit could not start properply.
Please follow the below steps to enter the recovery mode to install the update file.
Hold the power button and keep it for 3-5 second, loose it and short press it at once, then wait for a few seconds, then the unit will enter the recovery mode, please choose to update the system from SD or USB.
If possible, would you mind take a short video to help us check?
Regards


[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable

Return to “File Download”

Who is online

Users browsing this forum: No registered users and 2 guests