SWC For Honda CRV 2014. Please help

[jlhonda]

I Have Pumpkin 7" 7.1 Android
My Car is an Honda CRV year 2014.

he old car audio I have installed was a JVC Kenwood DNX5250.

Can Anybody help me to install the Pumpkin steering wheel control??

Thanks.
JL.

[Jammy]

Hi,
please first tell me your order number in amazon or buyer id in ebay,Pumpkin or AliExpress so that we can confirm more information about your unit and provide you positive solutions .
Regards

[jlhonda]

AMazon Order: 404-0408842-9313903

1.- Please, asist how I can connect With my Honda CRV car (2014).

2.- I have problems with the GPS Antena too. moving the cable it works for few days, fails, moving again several days more... What can I do?

Thanks

[Jammy]

Hi,
the car stereo you bought is a universal unit so you need to externally purchase a power adapter,and then you need to connect the wire KEY 1 to your steering wheel control 1 like follows .

0601.png (285.27 KiB) Viewed 2331 times

Regards

[jlhonda]

Hello,

I only need to connect 1 cable from Autopumpkin to the Steering wheel control?, and the key 2 and grounds??

[jlhonda]

I'm trying to connect the Key1 Cable to the honda Steering Cable. With my old Keenwood Autoradio was the only cable connected to steering wheel.

But other problem appears when I try to access the Steering wheel config on autopumpking, blank page. Do you know what can be happen??

WhatsApp Image 2018-07-04 at 19.06.00.jpeg (83.1 KiB) Viewed 2215 times

This is the version:

WhatsApp Image 2018-07-04 at 19.06.00 (1).jpeg (164.84 KiB) Viewed 2215 times

WhatsApp Image 2018-07-04 at 19.06.00 (2).jpeg (165.95 KiB) Viewed 2215 times

[Jammy]

Hi,
your connection is right. Here is an referring video about how to configure the steering wheel control,
https://www.youtube.com/watch?v=VxVYSwWgYb4
If it still doesn't help,you can connect K2 to your honda Steering Cable (in fact,K1 has the same function with K2).You'd better also connect the balck(ground) wire to your pin M or car metal .
Regards

[jlhonda]

Just found the cable that comes from SWC. Now I have other problem.

Configuring the buttons, Not all the times I press the button on the steering wheel, the radio responds correctly. And when the radio responds takes the last selected action.

Example:

1.- I press Vol+ on the steering wheel (several times until the radio responds)
2.- I select the Vol+ key.
3.- I press Vol- on the steering wheel (several times until the radio responds)
4.- I select Vo- Key
5.- Save

Pusing on Vol- or Vol+ not allways responds, and when it reponds not allways do the correct action.

Too anying... Do you know what can be happening?

Thanks for your support.
JL

[Jammy]

Hi,
about this issue,you can try to connect Key2 instead of Key1 your steering wheel cable.
If it still persist ,you can consider purchasing an SWC adapter like following.

3.png (112.74 KiB) Viewed 2165 times

Waiting for your feedback.
Regards