- 1.png (109.63 KiB) Viewed 10789 times
1.Remove the screws on the panel and take the panel off
Remove the four screws on the both side of the panel, and then it is easy to take off the panel.
- 2.png (231.88 KiB) Viewed 10789 times
- 3.png (242.81 KiB) Viewed 10789 times
2.Disconnect the cable
These are two rows of cables, we need to disconnect the cables carefully.
- 5.png (270.86 KiB) Viewed 10789 times
3.Take the Power/volume button off
Flip the panel, there is a power/volume button here. Please take the button off.
- 6.png (212.71 KiB) Viewed 10789 times
4.Remove the screws on the button board
- 8.png (262.24 KiB) Viewed 10789 times
5.Remove the case
After remove the screws, the panel case can be take off.
- 9.png (240.88 KiB) Viewed 10789 times
6.Remove the screws on the key board
- 10.png (265.12 KiB) Viewed 10789 times
7.Take the key board off
- 11.png (254.01 KiB) Viewed 10789 times
8.Take the button board off
- 12.png (260.91 KiB) Viewed 10789 times
9.Remove the insulating tape(please be careful)
After take off the button board, we can see the touch screen and LCD screen. So now what we have to do is seperate them.
But there is a tape around them, we must remove the insulating tape carefully.
- 14.png (161.84 KiB) Viewed 10789 times
10.Seperate the touch screen and LCD screen
- 15.png (161.65 KiB) Viewed 10789 times
11.Replace with new touch screen or LCD screen
- 16.png (125.68 KiB) Viewed 10789 times
Then what we do is install, we can install in reverse order of disassembly.