RQ0269E-UK-A

[craigywsm]

Hi all,
I have just purchased RQ0269E-UK-A
1. I have added a few applications to the second android screen and when I turn off then back on they disappear.
2. I have accidently added two extra blank screens and cant find out how to remove them.
3. I am unable to gain access to music on my android phone via Bluetooth can only see a root folder not able to browse.
4. Is there a location I can find firmware updates
4. Is there a git repo for development that I a able to test /develop builds.
5. Will there be android 6 developed for this unit / can I help develop?
Kind Regards
Craig

[Jammy]

Hi,
Sorry for the late reply due to the National Day.
1. please check if the red and yellow wire pin position are right to your original cable, you can refer another forum.
viewtopic.php?f=3&t=19
2. Could you please tell us what blank screens you added? Just attach some picture.
3. This unit support to play music via bluetooth. You need to open the music player and enter the bluetooth music, then it will play.
4. Please go to the Settings--about device to find the firmware version.
5. The unit does not have the git repo for development.
6. Currently we don't have the android 6.0 firmware for this kind unit.
Regards

[craigywsm]

Hi Thanks for the reply.
1. I have checked the wiring and yes the yellow is permanent live and red is switched.
2. please see attached photos.
20161019_131143 is my home screen
20161019_131149 is my second screen that i have added a shortcut to the shortcuts will dissapeer when i power off and turn back on
20161019_131154 this is a blank screen when i scroll to the left
20161019_131157 this is also a blank screen.
3. quite right with the bluetooth yes need to load music app on phone then it works
4. firmware version MTCC-KLD6-V2.91
android 5.1.1
kernel version 3.0.101+
rk3188-userdebug 2206206.16:41
5/6 hope to work with you for development in the future.
Kind Regards
Craig

[Jammy]

Hi,
1. That's strange, normally the installed apps will be deleted only when you do the factory data reset to remove it manually.
And as the result you checked, the red and yellow wire are all without problem.
You can install our latest firmware for your unit to check if the problem 1 and 2 will be solved.
Here is the link for you. Hope some help.
https://mega.nz/#!ZYFCGIZY!vlVpc2S_zPiz ... xD2mRZkC60
Regards

[craigywsm]

Hi thanks for the quick reply.
Just for a quick note last nigh i have added quite a few icons to the desktop and now its remembering them. Strange it seams that if it is only navmii then it will delete it but if there are more icons its ok. Not logical
i will apply the new firmware and let you know my findings.
Please can you tell the the firmware version in the link you have provided.
Kind Regards
Craig

[Jammy]

Hi,
If just the navmii will be deleted when the unit turn off and back on, it maybe the navmii not compatible with our unit, sorry about this.
The version of the firmware I sent to you is as below shown.
kernel version 3.0.101+
rk3188-userdebug 05082016
Regards