PUMPKIN CAR STEREO SUPPORT CENTER

I have a
Pumpkin 2 Din 8 Zoll Android 4.4 Quad Core Autoradio Moniceiver DVD Player GPS Navigation für VW Unterstützt Bluetooth OBD2 Wifi Lenkradfernbedienun

Amazon.de Bestellnr. 303-0227365-0886763

i have flashed my radio to 5.1.1 but my FM don´t work.
i need the right mcu and firmware for my radio to downgrade this.

Sorry my englisch is very bad.

Hi,
Could you please tell us your original and current firmware and mcu version?
We need this information to provide you positive solution.
About the FM not working issue after flashing the radio, you can go to the Settings--factory settings to check the radio mode which should be "TEF6686".
My English is also bad, so please don't mind, I can understand you.
Regards

I'm back to 4.4. It is still missing the correct mcu file. The next time I send a link to the current pictures of my radio settings

here is a link to the pics from my actually settings

https://drive.google.com/drive/folders/ ... sp=sharing

Hi,
Thanks for your information.
Here is the link of the firmware and mcu file for your unit KD-C0356.
Firmware 4.4.4_27112015:
https://mega.nz/#!wdcCGIYS!hKUwZA4cgzAv ... 7pGrvc4D9o
MCU MTCB-KLD2-V2.75:
https://mega.nz/#!UcN3gTDT!Sn6nY8aAjEq4 ... 0sy0QWHmLI
You can download them and install them to flash your unit back, hope some help.
Regards

ok thank . but my problem is. i can not change the keylight in settings ( keylight is activated ) . mcu installed and the key tone not work.
And where can I download the igo software again?

Hi,
For the keylight, you can go to the Settings--element to set the button light color to what you want.
If you could not find it, please enter the factory settings(126)--others to set the RGB LED to "RGB", click Apply and Exit.
For the free igo software, here is the link of our latest maps.
https://mega.nz/#!cIUUSIwD!oqdhxng1Qjf5 ... Y7HcGVpZYs
Regards