PUMPKIN CAR STEREO SUPPORT CENTER

Hallo,

i have a lot of issues. So i made some videos from every issue.

First issue is that the ACC is not working.


Next is that i have no sound on rear speaker.


Then comes the reverse-cam. It seems to work fine when the car engine is NOT running but when i start the cars engine i can´t use the reverse-cam


The radio is not connected with a trigger wire!!!!! There is no trigger wire out from the radio. So it looks like that the CANBUS is switching the display.

At last is that i can´t log into Google PlayStore. And i can´t download the files from here. Links seems to be broken.


Now is the question what comes next. Right now i am not very satisfied with the radio.

Hope we can fix all the issues fast
Here is the ISO-Plug and infos to the radio

And i got it from here

Ebay.com
Artikelnummer : 272241785579
Transaktionsnummer : 1744478687017
Seller: pumpkin18de

Greeting from Sweden
Tim

Hi,
Sorry for the late reply due to the weekend.
For the ACC issue, it's normal for our unit, it does not perform like your original once, sorry for the little confuse happened.
For the rear speaker no sound issue, you can check the below forum to connect the RCA cable with the power cable.
viewtopic.php?f=13&t=277
For the reverse camera issue, there is another forum about how it happens and the solution for it.
viewtopic.php?f=14&t=278
For the Google play store issue, I just write a post to describe the way to solve it, just download two update Google service apk on our unit to solve it.
viewtopic.php?f=3&t=1322
Regards

Hallo Jammy,

thanks for your reply. So if i understand it right with the rear speaker, is that i should take the A B C D output from the ISO-Plug and connect it with the extra AUDIO OUTPUT cable for the unit?? Should it not be an AUDIO INPUT????????

The reverse camera issue did i resolve yesterday by take a 30A 12V relay. Sounds a little bit funny but it works well . Sorry for the post about that. Maybe i was to quick to post, should instead read the forum carefully

I will try the Google play issue later today and reply.

Greeting from Sweden

Bildschirmfoto 2016-12-19 um 19.40.31.png (791.92 KiB) Viewed 1631 times

Hallo Jammy,

did you see my last question??
Did you really mean output to output ??

Hi,
Sorry for my late reply.
In fact, the A B C D output from the ISO-Plug is for audio input, just in order to make other client understand easily to connect the corresponding RCA cable, so the factory technician design like that, sorry for the misleading brought to you.
SO you should take the A B C D output from the ISO-Plug and connect it with the extra AUDIO OUTPUT cable for the unit.
Regards

Thanks for replay
It´s working now
Maybe i´m thinking for technical

Greeting from Sweden