PUMPKIN CAR STEREO SUPPORT CENTER

AA0497B.jpg (121.98 KiB) Viewed 23954 times

AA0496S.jpg (132.02 KiB) Viewed 23954 times

Recently, we have found that some Ford car stereos( AA0497B, AA0496S) would consume all of the original car battery after installation. Therefore, we come up with the following method to solve this problem. The step is simple, just according below picture to cut the red line in the power cord and the problem will be solved. The red line is in the quad lock cable inside the CanBus power cable.

Notice: When cutting the red wire, cut it from the end near the plug. Do not cut from the end near the CanBus, otherwise, the CanBus may fail.

quadlock of the CanBus power cord.png (6.97 MiB) Viewed 23911 times

red cable.jpg (91.19 KiB) Viewed 23770 times

If your car stereo still exists the problem after cut the red line, please feel free to contact us.

I had the same issue with Android 8.0 ND0572B, in my Ford Mondeo and i resolved the problem by switching off the android car stereo before switch off car engine.