PUMPKIN CAR STEREO SUPPORT CENTER

Hi

What unit to buy, when I need:

Steeringwheel control
DAB+
A2DP (control phone)
The acustic signal when reversing (hopefully the distacemeter to)
The unit connect with the display in dashboard (betwean speedo. and rpm.), showing the normal stuff.

Now in my Superb is an Amundsen (no + and no DAB(+))
Her is an picture:

Borrowed the picture from another site.

I can`t remove the player for a picture from the back, nor have I found any on the web, that I can thrust is the right one.

Kindly

Petter

Hi Petter
Thank you for your message!
Would you mind check the following link to see if it is ok with you? Please be noted that the item do not support original car rear camera and original car USB and mic, you need to use the USB and mic that the item included.
http://www.autopumpkin.com/pumpkin-late ... ntrol.html

And here is the link of the DAB+ box:
http://www.autopumpkin.com/pumpkin-exte ... tereo.html

Please be noted that all those item are sent out from Hong Kong by express, if you are located in European countries, you can choose to buy from our uk website(http://www.autopumpkin.co.uk) and german website(http://www.autopumpkin.de), cause these site items are sent from UK local warehouse and German local warehouse.
Regards!

It looks like a nice one. But is there some that fits, but don`t looks like it is orginal? A little more universal, if you know what I mean.
Maybe I will move it to another car some time.

I don`t have anu USB in car now, so that ok.
But I have to place a new MIC for the phone function?

Hi there
Thank you for your reply!
I understand what you mean, you want to install it in other cars in the future, right? But if you bought universal 2 din device, then you need to buy plastic frame and mounting brakets to install the radio into your car. We do not have it for sell, but we can help you buy from here in China and send it together with the universal item to you.

frame-mounting.jpg (44.22 KiB) Viewed 2408 times

And it will not look nice after installed, It may look like the following picture shows.

installed.jpg (50.34 KiB) Viewed 2408 times

And you also need to buy the can bus decode box wiring from the VW special item included to use on the universla device to connect with your original car. Because your car original with can bus system, and the original car connector will also different from universal device's ISO cable. That's why we suggest you buy special item for Volkswagen car only. Here is another item which may looks different from the original car, and it also have the function you wanted:
http://www.autopumpkin.com/pumpkin-8-in ... ntrol.html

Are you sure you want to buy the universal item instead of the special item for Volkswagen?
Regards!

I can see that it not as nice as the one made for the car.
I can see me buy this, but still some answer to get.

Will it work with the display in the dashboard?
Ex: Show GPS info in the dash, radio info. The normal stuff.


And will the reverse sensor work? (now it uses sound and the orginal radio to show distance)

Hi there
Thank you for your reply!
Ok, please do not forget to buy the other parts include the can bus adapter. Below is one of the 2 DIN device we suggested, if you do not like it, you can check other 2 DIN device which support DAB function.
http://www.autopumpkin.com/pumpkin-univ ... ntrol.html
And the dashboard small screen will display the radio, CD track something like that, but only if your original car radio can support to display, then our radio will support to display. And it is also the same as the reverse sensor, I think it will only can work sound, but you can try when you have the new radio
Regards!