PUMPKIN CAR STEREO SUPPORT CENTER

Hi guys, I bought a CN10-03303B-02A via Amazon UK. I have a Lancia Delta 2010 with steering wheel controls. The unit is supplied with this power cable with CAN-BUS.My original radio has these connectors. I would like help to properly wire the unit, I already bought an ISO adapter but I only understood how to connect yellow, black and speakers. There remains to connect brown and brown-black (CAN-A CAN-B ???), K1, K2. there is another cable named REVERSE with MIC ,red wire CAM-LINE e brown AMP-CON (I think I should use only MIC).Regards

Hi,
i can not open this link https://drive.google.com/open?id=173DyE ... QkAl.Maybe you can directly attach the picture on the next post.
Regards

Attached are the photos of connector in my car. The Amazon order is : Order # 205-2619334-4012305 on 28 November 2017

Hi,the canbus which is attached to the ISO cable is not compatible with your car.
so we suggest you that you can contact the customer service through amazon message to send you an Euro universal ISO cable(following picture) and then you cut off the red wire of that cable and connect it to your car ACC position.In this case, you may be unable to use some funcitons such as steering wheel control.

QQ截图20171214094137.png (172.43 KiB) Viewed 1201 times

Or you can try to find one canbus which suits your car.
Regards

hello jammy, after a long time due to the dispatch of the shipper, I received the Euro universal ISO cable and I finally installed the car radio. It seems to work well except for three problems: 1) the radio keys do not light up. 2) the radio, every time I turn on the car, starts with the logo pumpkin and android restart. It's normal ? 3) Is there a way to turn on the radio without having to turn on the car? As you suggested, I only cut the red cable and connected to a + 12v under the ignition key (ACC). Regards

Hi,
1.you can connect the "ILL" wire of the ISO cable to your head light.Then enter settings - car settings - extra setttings(123456) - panel light setting page choose open option.

020701.png (35.37 KiB) Viewed 1055 times

If you choose close ,the key light will constantly on.
2.it is normal that the unit first display pumpkin logo and then android logo .
3.correct operation. If you don't want to turn on the car engine ,you can just plug the car key to acc place.
Regards