[Time] How to set correct time on the home screen
Posted: Thu Apr 21, 2016 8:03 am
Normally the display time on the unit will sync to the GSP time when you install the GPS antenna and use the GPS app.
For the Pumpkin android unit like the below main screen, you can set to sync to the GPS time or network time.
here is a picture for your reference.
But there may have some problem which the display time is later or earlier than the local time.
The Pumpkin wince unit with UI look like the below picture will only display the time sync to GPS when you use the GPS, this is the compatibility problem between the wince system and the GSP app, but you can follow the below steps to solve it.
You can enter the GPS menu setting to cancel the Auto Time Correction GPS. Below is the steps about the solution.
Please enter the GPS menu, click the Settings-->Regional-->Regional Settings-->Time and Time zone Settings to cancel the Auto time correction to GPS option. We have attached some picture for your reference.
In addition, if the OSD time is later one hour or faster one hour than your local time due to the summer time or the incorrect time zone, you can enter the Setup--Time to switch the Auto sync to OFF, set the time manually, then the unit will display the correct time.
Or you can set the time zone on the settings menu later one hour or faster one hour, just like the attached picture.
If you still have problem about the time, please contact our customer service or leave a post on our forum.
We will reply you and help you solve the problem ASAP.
Regards
For the Pumpkin android unit like the below main screen, you can set to sync to the GPS time or network time.
- 8.png (322.84 KiB) Viewed 47608 times
here is a picture for your reference.
- 7.png (43.79 KiB) Viewed 47608 times
But there may have some problem which the display time is later or earlier than the local time.
The Pumpkin wince unit with UI look like the below picture will only display the time sync to GPS when you use the GPS, this is the compatibility problem between the wince system and the GSP app, but you can follow the below steps to solve it.
- 1.jpg (46.84 KiB) Viewed 48188 times
You can enter the GPS menu setting to cancel the Auto Time Correction GPS. Below is the steps about the solution.
Please enter the GPS menu, click the Settings-->Regional-->Regional Settings-->Time and Time zone Settings to cancel the Auto time correction to GPS option. We have attached some picture for your reference.
- 2.png (456.23 KiB) Viewed 48188 times
- 3.png (520.99 KiB) Viewed 48188 times
- 4.png (563.9 KiB) Viewed 48188 times
- 5.png (559.47 KiB) Viewed 48188 times
In addition, if the OSD time is later one hour or faster one hour than your local time due to the summer time or the incorrect time zone, you can enter the Setup--Time to switch the Auto sync to OFF, set the time manually, then the unit will display the correct time.
- 6.jpg (48.31 KiB) Viewed 48188 times
Or you can set the time zone on the settings menu later one hour or faster one hour, just like the attached picture.
- 9.jpg (45.87 KiB) Viewed 47608 times
- 10.jpg (50 KiB) Viewed 47608 times
If you still have problem about the time, please contact our customer service or leave a post on our forum.
We will reply you and help you solve the problem ASAP.
Regards