Hi, I recently bought a Pumpkin ND0377B (from Amazon) and installed it in my 2005 VW Transporter.
For the first 30 minutes of use the unit worked fine, then started to display an error (yellow warning triangle) intermittently. This problem got worse over the next hour or so, now there is mostly either a black screen or error message, with the unit occasionally working for a few seconds/minutes before the error returns.
Is there any fix/firmware upgrade I can try before I return the unit?
ND0377B - constant errors
-
- Posts: 4
- Joined: Sun Sep 09, 2018 2:54 pm
- Contact:
Re: ND0377B - constant errors
Hi, here it is .
https://mega.nz/#!bfoAxSCb!tRVYoJ7PLpk6 ... YUgvDCZHkU
Please place the update.zip files on the root content of one sd card or USB stick, then insert the card into the GPS slot if you choose this way , next enter settings - extra settings - system update .
Regards
https://mega.nz/#!bfoAxSCb!tRVYoJ7PLpk6 ... YUgvDCZHkU
Please place the update.zip files on the root content of one sd card or USB stick, then insert the card into the GPS slot if you choose this way , next enter settings - extra settings - system update .
Regards
-
- Posts: 4
- Joined: Sun Sep 09, 2018 2:54 pm
- Contact:
Re: ND0377B - constant errors
Thanks - I will try it.
Re: ND0377B - constant errors
Hi did this issue get resolved I have the same unit with same issue
Thanks
Paul
Thanks
Paul
Re: ND0377B - constant errors
Hi,
did you install the reverse cam ? And which power cable you were using ?
If not , you need to cut off the wire labelled "reverse-in " from back of the unit .If yes,you can contact the pumpkin customer service or write to support@autopumpkin.com for further help.
If you were using the ISO cable ,you can refer to this article .
viewtopic.php?f=8&t=11980&p=23949#p23949
Regards
did you install the reverse cam ? And which power cable you were using ?
If not , you need to cut off the wire labelled "reverse-in " from back of the unit .If yes,you can contact the pumpkin customer service or write to support@autopumpkin.com for further help.
If you were using the ISO cable ,you can refer to this article .
viewtopic.php?f=8&t=11980&p=23949#p23949
Regards
-
- Posts: 4
- Joined: Sun Sep 09, 2018 2:54 pm
- Contact:
Re: ND0377B - constant errors
Hi thanks for your advise. I cut the wire then connected it to the signal wire of the reverse cam and all is working great now
Big thank you
Big thank you
Return to “Car Radio DVD GPS Stereo”
Who is online
Users browsing this forum: No registered users and 61 guests