[CN10-02201B-02] WiFi Auto Connect

[GoblinTech]

I'm having an issue where for some reason the WiFi will only Auto-Connect / Reconnect to the first network it recognises when turning on.
For example when I turn it on outside my house it will connect to my home wifi, when I drive out of range of that it will disconnect, but will not automatically connect to my car wifi or wireless hotspot, but will reconnect to my home wifi when back in range.

Any ideas?

[Jammy]

Hi,
You can try to flash this firmware.
https://mega.nz/#F!kc1ySQSC!yF9U91PU-0JhLIlaEKBbig
Regards

[maingray]

@goblintech, did this update work for you?

[voddow]

[Jammy]

Hi，
you need to un-zip them.At last,put four files on the root content of the SD card.
Regards

[voddow]

And how do I start the update process (which menu)?

[Jammy]

[voddow]

[theh8ed]

I am having the same/similar issue. Pumpkin unit hooks up to home wi-fi just fine but will not connect to Samsung S7 Active hotspot. Had to return m first unit because the SD card reader was bad however it worked fine with my S7's hotspot. It appears this unit needs an update of some sort. I tried flashing the firmware with the link you posted but when I tap on MCU update it asks if I want to start the update and when I click OK nothing happens. The files are unzipped and in the root of the SD card. If I tap the Factory update it will ask from extSD. Any suggestions are welcome and appreciated.

Getting frustrated...don't want to swap the unit again...

Thanks!