how to solve the wrong display of GPS compass on the VW car computer
Posted: Wed Dec 26, 2018 7:43 am
Hi all,
Recently ,few parts of our clients which purchase our VW special unit and happen to find that the direction on the car computer shows N every few seconds . This separate compass is built into the CAN-BUS.
So the solution is :
1.first check whether the model of your canbus decoder is VW-SS-07,see picture.
If not, please don't flash the following files.
2.next,download this software onto the root content of one sd card or USB stick and insert it to the unit. https://mega.nz/#!zXJBnQxZ!EOEbuxoIjO3O ... o9-g2hBfAI
3.enter factory settings and input the code " canupdates" instead of password, see picture.
4.the unit will update itself and reboot automatically after finish the updating working.
More query ,you can contact the pumpkin customer service or write to support@autopumpkin.com.
You need to tell them your order number or ebay id so that they can confirm your unit .
Recently ,few parts of our clients which purchase our VW special unit and happen to find that the direction on the car computer shows N every few seconds . This separate compass is built into the CAN-BUS.
So the solution is :
1.first check whether the model of your canbus decoder is VW-SS-07,see picture.
- vw canbus.png (153.93 KiB) Viewed 1273 times
If not, please don't flash the following files.
2.next,download this software onto the root content of one sd card or USB stick and insert it to the unit. https://mega.nz/#!zXJBnQxZ!EOEbuxoIjO3O ... o9-g2hBfAI
3.enter factory settings and input the code " canupdates" instead of password, see picture.
- update.png (160.6 KiB) Viewed 1273 times
4.the unit will update itself and reboot automatically after finish the updating working.
More query ,you can contact the pumpkin customer service or write to support@autopumpkin.com.
You need to tell them your order number or ebay id so that they can confirm your unit .