PUMPKIN CAR STEREO SUPPORT CENTER

Posted: **Sat Nov 02, 2019 5:59 pm**

Hello,

I have ND0572B installed in car and I'm going to install reverse camera now.
The question is, which wire to use to power the reverse camera so I don't have to use reverse light power? I think there is a wire coming out of the unit which gives 12V when you put it in reverse gear, but which wire would that be?

Thanks

Posted: **Mon Nov 04, 2019 2:27 am**

Hi,

What's your car model?
This needs to based on your car model to find which wire you have to connect.

Thank you
Jammy

Posted: **Mon Nov 04, 2019 5:57 pm**

Posted: **Tue Nov 05, 2019 1:26 am**

Hi,

You can connect to the "video-in", it needs to switch the car stereo to Aux mode.
We suggest buying a USB interface DVR. It is easier to install.

Thank you
Jammy

Posted: **Tue Nov 05, 2019 9:35 am**

Posted: **Wed Nov 06, 2019 1:35 am**

Hi,

The front camera connects to the "video-in", and then the reverse camera connect to "cam-in".

Jammy

Posted: **Wed Nov 06, 2019 7:24 am**

Posted: **Fri Nov 08, 2019 1:24 am**

Hi,

The front camera connects to the "video-in" is the power.

Jammy

PUMPKIN CAR STEREO SUPPORT CENTER

Reverse Camera wiring question

Reverse Camera wiring question

Re: Reverse Camera wiring question

Re: Reverse Camera wiring question

Re: Reverse Camera wiring question

Re: Reverse Camera wiring question

Re: Reverse Camera wiring question

Re: Reverse Camera wiring question

Re: Reverse Camera wiring question