Fault in the can Gateway on Golf MK5
Posted: Sun Dec 22, 2019 12:27 pm
hello!
Ever since I installed the radio (AS0374B, Pumpkin android 7.1) in my Golf, there was something bugging me!
In the Can Gateway coding there was this error:
Address 19: CAN Gateway Labels: 1K0-907-530-V4.clb
Part No SW: 1K0 907 530 AA HW: 1K0 907 951
Component: J533 Gateway H16 0222
Revision: H16 Serial number: 4020K095160EBE
Coding: ED807F46000202000002
Shop #: WSC 02070 207 180113
VCID: 66C42EB751746A0EC7-8032
2 Faults Found:
01305 - Databus for Infotainment
004 - No Signal/Communication
Freeze Frame:
Fault Status: 01100100
Fault Priority: 1
Fault Frequency: 254
Reset counter: 104
Mileage: 125627 km
Time Indication: 0
01304 - Radio
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 2
Fault Frequency: 44
Reset counter: 144
Mileage: 125648 km
Time Indication: 0
also, there is a similar error on the radio itself:
56-Radio -- Status: Sporadic communication error 1000
Address 56: Radio Labels: None
Part No SW: 3TD 035 156 HW: 3TD 035 156
Component: RadioSK46MID 006 0010
Coding: 010004240410
Shop #: WSC 00078 790 00000
VCID: 7F0A9BD3EEEEDBC624-802A
No Faults Found
or DTCs not supported by controller
or a communication error occurred
so... I asked around, most notably friends with same cars and Android radios, they all have the same faults. But I have seen a couple who do NOT have these errors!
So, I took screenshots of the radio's coding:
this is how the Pumpkin radio is recognized by the car.
At first it says this, but then proceeds to the following:
Well... all bytes and bits are blank!
Maybe therein lies some solution?!
I have recently updated my Can Gateway module (the above scan exempt is from the new module ending in AA. The old one was a Q) but nothing changed.
Ever since I installed the radio (AS0374B, Pumpkin android 7.1) in my Golf, there was something bugging me!
In the Can Gateway coding there was this error:
Address 19: CAN Gateway Labels: 1K0-907-530-V4.clb
Part No SW: 1K0 907 530 AA HW: 1K0 907 951
Component: J533 Gateway H16 0222
Revision: H16 Serial number: 4020K095160EBE
Coding: ED807F46000202000002
Shop #: WSC 02070 207 180113
VCID: 66C42EB751746A0EC7-8032
2 Faults Found:
01305 - Databus for Infotainment
004 - No Signal/Communication
Freeze Frame:
Fault Status: 01100100
Fault Priority: 1
Fault Frequency: 254
Reset counter: 104
Mileage: 125627 km
Time Indication: 0
01304 - Radio
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 2
Fault Frequency: 44
Reset counter: 144
Mileage: 125648 km
Time Indication: 0
also, there is a similar error on the radio itself:
56-Radio -- Status: Sporadic communication error 1000
Address 56: Radio Labels: None
Part No SW: 3TD 035 156 HW: 3TD 035 156
Component: RadioSK46MID 006 0010
Coding: 010004240410
Shop #: WSC 00078 790 00000
VCID: 7F0A9BD3EEEEDBC624-802A
No Faults Found
or DTCs not supported by controller
or a communication error occurred
so... I asked around, most notably friends with same cars and Android radios, they all have the same faults. But I have seen a couple who do NOT have these errors!
So, I took screenshots of the radio's coding:
this is how the Pumpkin radio is recognized by the car.
At first it says this, but then proceeds to the following:
Well... all bytes and bits are blank!
Maybe therein lies some solution?!
I have recently updated my Can Gateway module (the above scan exempt is from the new module ending in AA. The old one was a Q) but nothing changed.