Page 1 of 1
[CN10-02201B-02] WiFi Auto Connect
Posted: Mon Jul 17, 2017 10:31 pm
by GoblinTech
I'm having an issue where for some reason the WiFi will only Auto-Connect / Reconnect to the first network it recognises when turning on.
For example when I turn it on outside my house it will connect to my home wifi, when I drive out of range of that it will disconnect, but will not automatically connect to my car wifi or wireless hotspot, but will reconnect to my home wifi when back in range.
Any ideas?
Re: [CN10-02201B-02] WiFi Auto Connect
Posted: Tue Jul 18, 2017 8:52 am
by Jammy
Re: [CN10-02201B-02] WiFi Auto Connect
Posted: Mon Aug 07, 2017 6:29 pm
by maingray
@goblintech, did this update work for you?
Re: [CN10-02201B-02] WiFi Auto Connect
Posted: Wed Aug 30, 2017 10:19 am
by voddow
Re: [CN10-02201B-02] WiFi Auto Connect
Posted: Thu Aug 31, 2017 8:02 am
by Jammy
Hi，
you need to un-zip them.At last,put four files on the root content of the SD card.
Regards
Re: [CN10-02201B-02] WiFi Auto Connect
Posted: Thu Aug 31, 2017 9:10 am
by voddow
And how do I start the update process (which menu)?
Re: [CN10-02201B-02] WiFi Auto Connect
Posted: Fri Sep 01, 2017 2:24 am
by Jammy
Re: [CN10-02201B-02] WiFi Auto Connect
Posted: Fri Sep 01, 2017 7:21 am
by voddow
Re: [CN10-02201B-02] WiFi Auto Connect
Posted: Thu Sep 14, 2017 10:06 pm
by theh8ed
I am having the same/similar issue. Pumpkin unit hooks up to home wi-fi just fine but will not connect to Samsung S7 Active hotspot. Had to return m first unit because the SD card reader was bad however it worked fine with my S7's hotspot. It appears this unit needs an update of some sort. I tried flashing the firmware with the link you posted but when I tap on MCU update it asks if I want to start the update and when I click OK nothing happens. The files are unzipped and in the root of the SD card. If I tap the Factory update it will ask from extSD. Any suggestions are welcome and appreciated.
Getting frustrated...don't want to swap the unit again...
Thanks!