Page 1 of 1
DAB+ not working correctly, stations not everywhere
Posted: Mon Nov 06, 2017 9:34 pm
by GalantV6
Hello.
I have an RQ 0264.
The DAB+ doesnt work good, some times i have radio but it ceeps losing signal.
Also the stations where not the same when i surge at home, after driven several KM the station is lost.
And have to surge again.
Whats the problem?
Re: DAB+ not working correctly, stations not everywhere
Posted: Wed Nov 29, 2017 6:55 am
by cyberkul
My signal suddenly goes from full (5 green bars), and then blinks 5 white bars, 5 green bars. If I reset the DAB+ app the reception is ok again. Sometimes it is ok for the rest of the trips, but usually I have to reset the app many times.
Re: DAB+ not working correctly, stations not everywhere
Posted: Thu Nov 30, 2017 3:22 am
by Jammy
Re: DAB+ not working correctly, stations not everywhere
Posted: Fri Dec 01, 2017 9:36 am
by nitram
Hi,
do you have also tried to listen to a DAB+ station and than switch back to the home screen. With my CN01 the DAB application is struccling and the audio starts to dropout if the application does not have the focus. If i switch back to the DAB+ application the dropouts are gone. This is not matter if the DAB station has full connection or less than full.
Greetings.
Martin
Re: DAB+ not working correctly, stations not everywhere
Posted: Tue Dec 12, 2017 12:29 pm
by cyberkul
Seems that my DAB+ problem was the USB-cable between the DAB+ receiver and the HU.
Re: DAB+ not working correctly, stations not everywhere
Posted: Thu Dec 14, 2017 4:36 pm
by miessie
Seems I have the same problem. I tried to install my unit today.
The DAB+ signal is falling apart now and then. When I grab the usb connection the signal is without disturbing.