Hi,
I just got the CN03-04101H and I have problems with Fastboot not working. Its working for approx. 5 minutes after I stopped the car, after that the radio is completele rebooting.
I suspected the voltage not beeing there after this time, but I measured it after 30minutes and there was +12V on the radio and still it booted completely new.
I am running a firmware from 20170328. Mcu version is "V2.44_1"
CN03-04101H Fastboot issues
Re: CN03-04101H Fastboot issues
Most people have the same issue. No fix from Pumpkin is available
![Arrow :arrow:](./images/smilies/icon_arrow.gif)
![Arrow :arrow:](./images/smilies/icon_arrow.gif)
Re: CN03-04101H Fastboot issues
i have the same problem.
i know it worked in the first weeks, and i do not know if i changed anything.
Where can i find the correct settings?
Also for the hidden factorymenue?
i know it worked in the first weeks, and i do not know if i changed anything.
Where can i find the correct settings?
Also for the hidden factorymenue?
Re: CN03-04101H Fastboot issues
I solved the problem by myself.
Downgrade of the MCU firmware to V2.41_1 did the trick.
Downgrade of the MCU firmware to V2.41_1 did the trick.
Re: CN03-04101H Fastboot issues
The update provided to me by jammy did not fix the issue. ![Evil or Very Mad :evil:](./images/smilies/icon_evil.gif)
![Evil or Very Mad :evil:](./images/smilies/icon_evil.gif)
![Arrow :arrow:](./images/smilies/icon_arrow.gif)
![Arrow :arrow:](./images/smilies/icon_arrow.gif)
Re: CN03-04101H Fastboot issues
MCU Image File: https://mega.nz/#!dQdkiDQR!PeaZO5QSrG7L ... K3C-lr52Eo
From Here: https://forum.xda-developers.com/androi ... 154/page16
First I had some other problems... If you are using a can box you should check if the wireing is correct for the ignition signal... My can box was faulty and only gave 7V out when ignition was on. So I just took the ignition signal from the cigarette lighter illumination. Works great.
From Here: https://forum.xda-developers.com/androi ... 154/page16
First I had some other problems... If you are using a can box you should check if the wireing is correct for the ignition signal... My can box was faulty and only gave 7V out when ignition was on. So I just took the ignition signal from the cigarette lighter illumination. Works great.
Re: CN03-04101H Fastboot issues
![Arrow :arrow:](./images/smilies/icon_arrow.gif)
![Arrow :arrow:](./images/smilies/icon_arrow.gif)
Who is online
Users browsing this forum: No registered users and 5 guests