Hi,
I really need some help to my pumpkin unit.
1. When I try to change the car logo to the Toyota logo in the factory settings menu and push apply and then reboot the unit reboots but never starts up again, I then have to push the power on button on the unit what to do?
2. Every time I have powered of the car, the unit makes total boot no fast boot What to do?
3. When tuned in to a radio station and the AF function activated, the radio doesn’t shift to a better frequency when the signal gets poor, what to do?
4. Just bought the DAB+ module from pumpkin but there are no DAB+ app installed on my radio what to do?
5. Is there a newer firmware for my radio?
Radio info:
MCU version:
MTCC-KLD6-V2.91
May 31 2016 19:54:14
Android-version:
5.1.1
1024*600
Kernesystem:
3.0.101+
chun@hctr930 #10
Wed Jul 20 15:59:15 CST 2016
Versionnummer:
rk3188-userdebug 05082016.16:30:02
S07 - RQ0269E problems need help
Re: S07 - RQ0269E problems need help
Hi,
Regarding the car logo problem, it is normal that you need to start the unit by pressing the power button.
Regarding the cold boot problem, it is normal too because the unit does not support fast boot function.
Regarding the DAB app, you can download this one :https://mega.nz/#!wENRCAyQ!PnbtN5dgsEJa9_WkjY5tsztHrvNwHbpZM8a1Kd_Lz2Q
Regarding the AF function problem,if the signal are not weak enough or the new frequency is not strong enough the radio doesn't switch to the better one.
Here is the latest firmware.
https://mega.nz/#F!cd1XEQBT!bpFEJtpzJBgi0mYQEWukNA
Hope your feedback.
Regards
Regarding the car logo problem, it is normal that you need to start the unit by pressing the power button.
Regarding the cold boot problem, it is normal too because the unit does not support fast boot function.
Regarding the DAB app, you can download this one :https://mega.nz/#!wENRCAyQ!PnbtN5dgsEJa9_WkjY5tsztHrvNwHbpZM8a1Kd_Lz2Q
Regarding the AF function problem,if the signal are not weak enough or the new frequency is not strong enough the radio doesn't switch to the better one.
Here is the latest firmware.
https://mega.nz/#F!cd1XEQBT!bpFEJtpzJBgi0mYQEWukNA
Hope your feedback.
Regards
Who is online
Users browsing this forum: No registered users and 14 guests