Firmware for PUMPKIN Android 7.1 - CN01-02306B-01A-DE1

[pimpkin_user]

I'm looking for the firmware for PUMPKIN Android 7.1 - CN01-02306B-01A-DE1. The links in the previous posts do not work anymore. Can someone help me? If possible the newest.

Thanks

[Jammy]

Hi,
here it is .
https://mega.nz/#!hIV3UaQD!wZKfYU0LMXJf ... FMCUgBEc00
Regards

[nitram]

Hi Jamie,

In this build the torgue sw is missing. Also I had similar to the guy in the post bevor the problem that the image told me that it was not installed correctly. But wipe and everything seems to work. The easy connect version is HT05. 4.4.0 is this the latest version? Because I have some trouble it connects but the sw installation is not working.

Greetings
Martin

[Jammy]

Hi,
here is the torque app.
https://mega.nz/#!ZUVl1QAL!B4hk09ceQW06 ... vZwqKj4fTk
About the easy connect issue,your version is the latest.Could your record an video about the prblem of the easy connect and the problem that the image told me that it was not installed correctly to me? I will try my best to help you.
Regards

[pimpkin_user]

Hallo Jammy,
thanks alot.

[nitram]

Hi Jammy,

thanks for you fast help. Will try to make a video of the easy connect issue next couple of days.

Problem is with the USB connect that the device will connect, The Application on my Huawei phone is starting but not on the Pumpkin radio.

Also i fogott to says that the DAB+ app is alos not included in the build. I used the YHX-DAB+Y1.60.apk you provided in an older post. Is this the latest one?

Greetings

Martin

[pimpkin_user]

Hallo Jammy,

sorry i have to report again.
Can you please also send me the mcu file. My device just will not start. I'm only in the Recover-Mode.
I hope with a new mcu file it runs again.
Thank you for your help.

[Jammy]

Hi nitram ,
the dab Y1.60 is the latest currently.
Regards

[Jammy]

Hi pimpkin_user,
On the post before, i gave you the firmware. You can place the files on the root content of one sd card and insert it into the GPS slot.Then,enter into recovery mode and do as the unit ask.You have should absolutely start unit.Is there anything wrong with this process ? Please try your best to provide me some pictures or an video about the problem you meet.
Thanks

[pimpkin_user]

Hallo Jammy,

That is certainly a mistake.I need the MCU file (dmcu.img).
Can you help me?
best regards