Android 6.0 unit stuck in boot CN10-02201B-08B

Technical file download link of PUMPKIN device

Moderators: Jammy, admin

[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable
Nossnahoj
Posts: 4
Joined: Mon Apr 03, 2017 6:11 pm
Contact:

Android 6.0 unit stuck in boot CN10-02201B-08B

Postby Nossnahoj » Mon Dec 04, 2017 11:57 pm

I changed the startlogo to a custom-made.
Now my unit refuse to boot.
Get stuck on a distored picture off my logo.

I need the right files to install a new firmware.
Cant find them i forum.



Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: Android 6.0 unit stuck in boot CN10-02201B-08B

Postby Jammy » Wed Dec 06, 2017 10:15 am

Hi,
firstly,thanks your suggestion .
About your problem,please ignore the firmware before.
1. Firstly ,download the following files to the root content of one sd card .
https://mega.nz/#!lc03XDZS!h-JqsApkPC9S ... SosiWXxZPY
You can refer to the following video to enter into recovery mode to flash the unit.
https://www.youtube.com/watch?v=S8Go80q4LB0
2.After flash successfully, click the RST button to reset the unit again.
3.Next, clear up the above files from the sd card.
4.Then download this files to the root content of the sd card and do as step 1.
https://mega.nz/#!ZMl2jCbY!XLrrvfYwvlem ... aCe-C42kn0
I know that you consult the customer before,we are belong to the same team, you can continue contacting the customer service if you have any query.
Regards

Nossnahoj
Posts: 4
Joined: Mon Apr 03, 2017 6:11 pm
Contact:

Re: Android 6.0 unit stuck in boot CN10-02201B-08B

Postby Nossnahoj » Wed Dec 06, 2017 9:59 pm

Thanks for your answer.
But it don´t work..
When i put sd-card in gps-slot card is not found. However.
When i put file on a usb-stick and place it in usb, the "update start" and a green bar completes.
Then it say "Update end".
BUT still the same boot-error.

How can i get in to recovery-mode ?? (like on a android cellphone) and try a factory reset.
I think my logo-picture may have wrong size and locking up the boot...

//Best regards Pelle

Jammy
Posts: 7550
Joined: Tue Mar 29, 2016 1:03 am
Contact:

Re: Android 6.0 unit stuck in boot CN10-02201B-08B

Postby Jammy » Thu Dec 07, 2017 6:23 am

Hi,
it is strange.Did you flash both two files seperately ?If you did,you can try to flash this firmware.
https://mega.nz/#!tINzRSRD!TTEw4ELCq5Pe ... u-BrdEkvd4
Unzip the rar files to the root content of one sd card/USB stick and then as you did before.
Hope your feedback.
There is no recovery mode for this unit,but there is a boot files to make the difference.
Regards

Nossnahoj
Posts: 4
Joined: Mon Apr 03, 2017 6:11 pm
Contact:

Re: Android 6.0 unit stuck in boot CN10-02201B-08B

Postby Nossnahoj » Thu Dec 07, 2017 9:08 pm

Hi again.
This files was much bigger, over 800mb total.
The ones i got last time was 800kb and 38byte.

Tryed to update and it counted up all 4 files as "done".
took about 30 min.

Still i am stuck on boot.
I took some pictures that show how it looked
2017-12-07 21.39.12.jpg
2017-12-07 21.39.12.jpg (2.05 MiB) Viewed 2592 times

2017-12-07 21.40.07.jpg
2017-12-07 21.40.07.jpg (3.74 MiB) Viewed 2592 times

maingray
Posts: 4
Joined: Wed Aug 02, 2017 2:41 pm
Contact:

Re: Android 6.0 unit stuck in boot CN10-02201B-08B

Postby maingray » Thu Mar 28, 2019 1:26 am

These links are no longer valid. Can you host elsewhere and link? thanks.


[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1236: count(): Parameter must be an array or an object that implements Countable

Return to “File Download”

Who is online

Users browsing this forum: No registered users and 16 guests