But I have a second problem - with long use the device freezes and stops working because of overheating
. Why is that?Question about CN10-11302b-02b (BMW e46)
Re: Problem CN10-11302b-02b
Maybe I know how to solve this problem, when I try I'll let you know.
But I have a second problem - with long use the device freezes and stops working because of overheating . Why is that?
But I have a second problem - with long use the device freezes and stops working because of overheating
. Why is that?- Attachments
-
- Screenshot_20171230-045655.png (35.32 KiB) Viewed 2575 times
-
- IMG_20171230_040817_HDR.jpg (610.86 KiB) Viewed 2575 times
Last edited by KhAN on Wed Jan 10, 2018 9:02 pm, edited 1 time in total.
Re: Problem CN10-11302b-02b
Today there was a trip of the same 500 km. During this time, the device freezed 10 times and reset three times. Worked only Navitel, sometimes radio. Is this some kind of defective or Pumpkin rating is down ?!
Re: Problem CN10-11302b-02b
Hi,
sorry about this problem.I reflected this problem to our engineers.Please wait for a few day and i will give you an reply.
Which app you are using to get the temperate of the cpu and GPU?
Regards
sorry about this problem.I reflected this problem to our engineers.Please wait for a few day and i will give you an reply.
Which app you are using to get the temperate of the cpu and GPU?
Regards
Re: Problem CN10-11302b-02b
Ok, l will wait your answer.
The app is AIDA64 https://play.google.com/store/apps/deta ... ire.aida64
The app is AIDA64 https://play.google.com/store/apps/deta ... ire.aida64
Re: Problem CN10-11302b-02b
On the first issue:
I installed device like this , " instructed me to short the red and pink wires on the rear of the unit", because of this it was not turned off (now everything is fine).
What about my second problem with overheating and subsequent freezing device?
I installed device like this , " instructed me to short the red and pink wires on the rear of the unit", because of this it was not turned off (now everything is fine).
What about my second problem with overheating and subsequent freezing device?
Re: Problem CN10-11302b-02b
Hi,
thanks for telling the solution of the first issue.
For the second issue,we have done a burn-in test but the highest temperature is around 70 degree.
So you can consider contact the customer service where you bought the unit to change one or other solutions.
Regards
thanks for telling the solution of the first issue.
For the second issue,we have done a burn-in test but the highest temperature is around 70 degree.
So you can consider contact the customer service where you bought the unit to change one or other solutions.
Regards
Re: Problem CN10-11302b-02b
Of course you will have a temperature lower in the test than in the car. The fact is that in the car directly behind the device are the air vents of the stove and during the operation of the car this increases the temperature of the device. I have a model special for bmw e46 (not universal) and I think that you should have known about that construction and must be make the cooling of the device more powerful! It is right or not?
Re: Problem CN10-11302b-02b
Hi,
yes,your idea is right.We also pay attention to this point .The highest temperature 70 degree is higher than the standards.
Regards
yes,your idea is right.We also pay attention to this point .The highest temperature 70 degree is higher than the standards.
Regards
Re: Problem CN10-11302b-02b
Maybe there is a new firmware for my device? Maybe it will be so heated?
Re: Problem CN10-11302b-02b
does the new firmware version appear?
Who is online
Users browsing this forum: No registered users and 9 guests