Trouble using steering wheel controls with CN10-04202H-01A

[Jammy]

Hi Bimbonn,
here is the mcu files .
https://mega.nz/#!cUFxDKRK!q5yL2mreoqHk ... WlFJbFiP5Y
Regards

[spastman1]

Hello Jammy,
I have the same problem as Bimbonn but my unit is a CN03-04101H.
I#ve ordered it at amazon.de with order-number 303-3402395-9061127.

Can I also use the mcu file you posted on your previous post?

Best regards
spastman1

[Jammy]

Hi spastman1,
that files doesn't suits your unit.
You can enter into the factory settings (password :3368) and set as follows and then click apply:

0901.png (300.65 KiB) Viewed 1821 times

Regards

[spastman1]

Thanks for your reply, Jammy!
"Key mode 1" was already set. But I changed it to "Key mode 2". Now the up and down button on the left side of the steering wheel only take effect on the BC, not on the radio (as it should be).
Maybe I will have a try to the rest of the Key modes!

Thanks again.

Regards

[Jammy]

Hi,
yes,the key model 2 is normal.Normally the up and down button on the left side of the steering wheel only take effect on the BC, not on the radio .And what is the problem of the unit? An video would be helpful for us to understand your issue.
Regards

[Jammy]

Thanks for your message replay. Sorry for the late response for not working on weekend. Jammy is not working today and tomorrow. He will replay you once coming back to work. Sorry for the inconvenient. Have a nice day. Joy

[Jammy]

Thanks for your message. Every radio holds different files. I am a little confused. The problem of the radio (Order 500003106 ) with the car Opel Zafira has been solved. However the radio CN10-04202H with the car Bimbonn has the same problem? Would you please send pictures or video to identify the problem? After we confirm the problem, we can give you positive solution. you can uplode the video on youtube. Wait for your reply

[Poncho]

Hey Jammy,
Unfortunately I had an accident and I can not make a video at the moment.
Thank you for your help.
Regards

[Jammy]

Hi Poncho ,
for the steering wheel problem,it is doesn't help to flash that mcu files ,you can contact the customer service to change the canbus.
Regards

[Bimbonn]